КСД301 10А 250В НЦ / НО Термостат Прекидач температуре Прекидач за термичку контролу

КСД301 НЦ / НЕ (Нормално отворено/нормално затворено) Прекидач термичке контроле Електрична оцена : 16А 125В АЦ (Ресистиве Лоад). 10250В АЦ термостат. 16А 250В АЦ. Радна темп : 50 ~ 230℃ (УЛ.ЦУЛ 205℃). биметална реакција,термостар са аутоматским ресетовањем, пластична шкољка термостата, фиксни заштитни држач. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) температура. At lower temperature the thermostat is closed.

КСД301 Прекидач за контролу температуре Термостат 150Ц Н.Ц 250В 10А

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

КСД301 температурни прекидач Контролни сензор Термални термостат 50°-160° клинасто стопало

Опис производа
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, поуздан, no arcing, long service life, and less radio interference. It is mainly used in disinfection cabinets, electric water bottles, лонци за кафу, electronic tile supports, hot water bags, диспензери за воду, фен за косу, усисивачи, electric heaters, микроталасне пећнице, електричне пегле, clothes dryers, motors and other electrical appliances.

Current Ratinf(Ir): 5А,10А,15A 16A;
Волтаге Ратинг(Ur):125V 250V ac;
Tf Tolerance: ±5℃
Electric intensity: AC2000V 50/60Hz
Отпор контакта: less than 50mΩ
Отпор изолације: more than 100MΩ
Брзина одговора: ≤1℃/min
Life time: more than 30000 циклуса
Одобрења: UL TUV CQC

Action Temperature(Tf) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Normally Closed: the thermostat is closed(connected) at normal status
Нормално отворен: the thermostat is open(искључен) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Стандард Пацкаге
100ком по врећи

Рок испоруке:
ЕКСВ, ДДУ, ДДП, Ц&Ф, ФОБ

Начини испоруке:
Интернатионал Екпресс, Ваздухом, Би Сеа