Цустом КСД301 1/2″ Снап Ацтион Биметални диск термостат у Кини

Bimetal Snap Action hi-limit Temperature Control: Фенолна смола КСД301 (керамика на захтев) серија 1/2” биметалних регулатора температуре из ИАКСУН Елецтриц нуди доказану поузданост у компактном, исплатив дизајн. 1/2″ Auto Reset Thermostat Switch use a bi-metal 1/2″ disc for snap action, positive & instantaneous opening or closing of electric circuits.

КСД301 регулациони регулатор високе границе температуре Контролни термостат

KSD301 1/2″ Биметални диск термостат брзог дејства

Bimetal Disc Snap Action Thermostats KSD301 For Electric Water Heater

The snap action of the bimetal disc provides excellent contact separation resulting in excellent life cycle at electrical loads of 15 ампс ат 120 volts and 7.5 amps@250 volts, и 10 ампс ат 240 ВАЦ за 100,000 циклуса. YAXUN Electric supplies the best and highest quality 1/2″ discs available. This is an automatic reset thermostat.

КСД301 има широк спектар примена које се могу користити као безбедносна граница(хи-лимит) или регулациони контролор.

KSD301 1/2″ Биметални диск термостат брзог дејства
1. KSD301 1/2″ Snap Action Bimetal Disc Thermostat Principle and structure
The main principle of KSD series thermostat is that one function of bimetal discs is snap action under the change of sensing temperature. The snap action of disc can push the action of the contacts through the inside structure, and then caused on of off the circuit finally. The main characteristic are the fixation of working temperature, the reliable snap action, less flashover longer working life and less radio interference.
2. КСД301 (H31) thermostat’s specification
2.1. Electrical Rating: AC 125V max 15A; AC250V 5A 10A 15A max 16A
2.2. Action Temperature: -10~300 degree
2.3. Recovery and action temperature difference: 10 до 25 степени, или према захтеву клијента.
2.4. Temperature deviation: +-3 / +-5 / +-10 degree or according to client’s request
2.5. Отпор кола: ≤50мΩ (Почетна вредност)
2.6. Отпор изолације: ≥100мΩ (DC500V Normal State)
2.7. Диелектрична чврстоћа: AC50Hz 1500V / min, no breakdown blinding (Normal State)
Life cycle: ≥100000
2.8. Normally closed or open
2.9. Two kinds of mounting bracket: movable or immovable
2.10. Терминал
a. Тип терминала: 187series of 4.8*0.5mm and 4.8*0.8mm, 250 series of 6.3*0.8mm
b. Terminal Angle: bending angle: 0~90°C optional
2.11. Two kinds of body: plastic or ceramic.
2.12. Two kinds of temperature sensor face: aluminium cap or copper head.
3. Difference of auto reset type and Manual reset type
3.1. Manual reset type: Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point cannot reset until reconnecting the circuit by pushing the reset button. And then the contact points recover, reaching a purpose of connecting or disconnecting the circuit and restarting the circuit by manual reset. (Kindly reminder: 1.This type of manual reset thermostat can reset when the temperature declines 20 °C after snap action by pressing the reset button. And 4~6 N will be advisable; please don’t use too much strength. 2. To ensure the normal function, the distance between the reset button and the close cover should not be less than 20.4mm. )
3.2. Manual reset type: Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point can auto reset and start working.
4. KSD301 1/2″ Snap Action Bimetal Disc Thermostat Application
It is used as temperature control for household electric appliances and widely applied in coffee pots, automatic toasters, laminators, electric water pots, steam guns, steam irons, wind warmers, микроталасне пећнице, диспензери за воду, итд.
Open temperature & ресетовање температуре

1. According to customer’s request to set the open temperature and reset temperature.

2. The standard open temperature and reset temperature’s sheet for auto reset type as below

Small appliances
White goods
Electric heaters
Automotive seat heaters
Water heaters