तापमान नियंत्रण के लिए चीन कस्टम थर्मिस्टर सेंसर जांच असेंबली

An NTC thermistor is a temperature sensor that uses the resistance properties of ceramic/metal composites to measure the temperature. Our full spectrum NTC thermistor is a resistance thermometer, or a resistor whose resistance is dependent on temperature. The term is a combination of “thermal” and “resistor”. It is made of metallic oxides, pressed into a bead, disk, or cylindrical shape and then encapsulated with an impermeable material such as epoxy or glass. हाई-एंड रेसिस्टर सेंसर जांच निर्माता - YAXUN तापमान संवेदनशीलता और AEC-Q200 योग्य थर्मिस्टर में माहिर है. टीसीटीआर – एनटीसी थिक फिल्म थर्मिस्टर. 47-1.6एमΩ. सबसे कड़ी सहनशीलता 1%. बी मान 2410K – 4800के.
थर्मिस्टर टेम्प सेंसर - पारंपरिक एनटीसी थर्मिस्टर्स की समान लागत और आकार पर सिलिकॉन-आधारित रैखिक थर्मिस्टर्स. उद्योग के सबसे छोटे रैखिक थर्मिस्टर्स के साथ उच्च सटीकता प्रणाली विश्वसनीयता प्राप्त करें.
Field-proven thermistor level-sensing technology with NPT mounting threads;
SP-M models temperature sensor are designed for use with ST-15 Control Monitors Electrical appliances, ऑटोमोबाइल, विमानन, small household appliances, toys;
Typical uses include storage tanks, double-containment piping trenches, and double-wall storage tank interstitial space monitoring;
Years of dependable, virtually maintenance-free operation;
Sensors can be easily extended to desired length at installation site using a 3/8” x 3/8” coupler and the required length of 3/8” NPT pipe.

Ender 3 Thermistor Sensor, Upgrade HT-NTC100K 3D Printer Thermistor Sensor: Thermistor temperature sensor. Metal head diameter: 3 मिमी, head length: 15 मिमी,cable wire length: 1 meter,योजक: XH2.54 2PIN, （Suitable for heating blocks with holes of 3 mm*15 mm-3 mm*20 mm）;
Widly Compatibility: Product recommended operating temperature -50 °C ~ +280 डिग्री सेल्सियस, can replace the cartridge K-type thermocouple temperature sensor. Compatible with the heatblocks with 3 mm hole,जैसे कि: V6 Volcano PT100 type heated block, वगैरह;
Sensors is accurate: The best feature was the flexible and heat shielded probe leads to the copper sensor. Unlike the other with a nickel plated probe/heat shrink, this can be fitted in very tight spots without worry. Be sure you redo your PID calibration;
Long Service Life: Compared with the same type that are insulated with ordinary heat shrinkable tubes, ours uses glass fiber with a temp resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temp work;
Fit ALL-METAL HOTEND: Work for E3D-V6 Volcano PT100 Ender 3 series all-metal hotend such as spider-hotend,K1-red-Lizard-hotend,dragonfly-hot-end,voron-hotend etc.

3डी प्रिंटर थर्मिस्टर 100k एनटीसी 3950 साथ 1 एंडर के लिए मीटर विस्तारित केबल वायर का उपयोग 3 V2 प्रो CR10 और अन्य 3D प्रिंटर एक्सट्रूडर हॉटेंड

Heater NTC thermistor: with M3 Thread Stud thermistor，Fast-Plug Connector Compatible with 3/3 V2/3 Neo/3 V2 Neo/3S/3 PRO/5/5

Creality के लिए NTC100K थर्मिस्टर सेंसर 3 v2 अपग्रेड 3x15 मिमी 3950 थर्मिस्टर संगत

Radial Leaded Resin Coated NTC Thermistor Features
High measurement accuracy.
Tight tolerance on resistance and Beta value.
त्वरित प्रतिक्रिया, small dimension.
Can operate in long time stability.
Nominal resistance @25C can be from R25 1kΩ–1000kΩ.
Typical resistance at 25C R25 1k ohm, 2k ohm, 2252 ओम, 3k ohm, 4.7k ohm, 5k ohm, 6.8k ohm, 10k ohm, 15k ohm, 20k ohm, 30k ohm, 40k ohm, 47k ohm, 50k ohm, 100k ohm, 150k ohm, 1000k ohm, वगैरह.
Dissipation factor: ≥3.0 mW/C in still air.
Thermal time constant: ≤12 seconds in still air.
तापमान रेंज आपरेट करना: -45C — +125C.

टिप्पणियाँ：□ in the part number for filling in resistance tolerance,
optional for ±1%(एफ), ±2%(G), ±3%(एच), or ±5%(जे).