बायमेटल स्नैप डिस्क थर्मोस्टेट

बायमेटल स्नैप डिस्क थर्मोस्टेट ( थर्मल कट-ऑफ स्विच किट, स्नैप डिस्क थर्मल स्विच किट) बंद सर्किट स्थिति में ड्रायर की उच्च सीमा थर्मल स्विच विफल होने पर ड्रायर को अत्यधिक गर्म होने से रोकता है.

बायमेटल स्नैप डिस्क थर्मोस्टेट ( थर्मल कट-ऑफ स्विच किट, स्नैप डिस्क थर्मल स्विच किट) बंद सर्किट स्थिति में ड्रायर की उच्च सीमा थर्मल स्विच विफल होने पर ड्रायर को अत्यधिक गर्म होने से रोकता है. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 डिग्री फ़ारेनहाइट, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

तकनीकी मापदंड
1. विद्युत पैरामीटर: 1) सीक्यूसी, वीडीई, यूएल, संस्कृति? AC250V 50 ~60हर्ट्ज 5ए / 10ए / 15ए (प्रतिरोधक भार)
2) UL AC 125V 50Hz 15A (प्रतिरोधक भार)
2. तापमान रेंज आपरेट करना: 0 ~ 240 डिग्री सेल्सियस (वैकल्पिक), तापमान सटीकता: ± 2 ± 3 ± 5 ± 10 डिग्री सेल्सियस
3. The difference between recovery and action temperature: 8 ~ 100 ℃ (वैकल्पिक)
4. तार लगाने की विधि: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, मोटाई 0.5, 0.8मिमी वैकल्पिक)
5. सेवा जीवन: ≥100,000 times
6. विद्युत शक्ति: 1 मिनट के लिए एसी 50 हर्ट्ज 1800 वी, कोई झिलमिलाहट नहीं, कोई टूट-फूट नहीं
7. संपर्क प्रतिरोध: ≤50mΩ
8. इन्सुलेशन प्रतिरोध: ≥100MΩ
9. संपर्क करें प्रपत्र: सामान्यतः बंद: तापमान वृद्धि, contact open, temperature drop, contact open;
सामान्यत: खुला है: Temperature rises, contacts turn on, तापमान गिरता है, contacts turn off
10. Enclosure protection level: IP00
11. ग्राउंडिंग विधि: Connected to the grounded metal parts of the device through the thermostat metal case.
12. इंस्टॉलेशन तरीका: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
विशेषताएँ
इसमें स्थिर प्रदर्शन की विशेषताएं हैं, उच्च सटीकता, छोटे आकार का, हल्के वजन, उच्च विश्वसनीयता, लंबा जीवन, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

ड्रायर थर्मल कट-ऑफ स्विच

ड्रायर थर्मल कट-ऑफ स्विच

हमसे संपर्क करें

आपके ईमेल का इंतजार है, हम आपको भीतर उत्तर देंगे 12 आपके लिए आवश्यक बहुमूल्य जानकारी वाले घंटे.

संबंधित उत्पाद

एक उद्धरण का अनुरोध करें

हमारा उद्धरण अनुरोध फ़ॉर्म भरें और हम यथाशीघ्र आपके संदेश का उत्तर देंगे!