Showing 241–252 / 325 tuloksia

Näytä sivupalkki
Näytä 9 12 18 24
Pt100 lämpötila-anturi sotilasvarusteille
PT100-anturi korkean lämpötilan kestävällä hopeoidulla suojatulla polyeteenilangalla

Pt100 lämpötila-anturi sotilasvarusteille

Ilmailu: Ilmailualalla, PT100-antureita käytetään nestemäisen hapen ja nestemäisen vedyn polttokammioiden lämpötilan mittaamiseen, turbiinimoottorit, polttokennoja, jne. lentokoneista ja avaruusaluksista. Korkean tarkkuuden, vaaditaan suurta luotettavuutta ja vahvaa vakautta.
PT1000 -lämpötila -anturi magneettisella koettimella
PT1000 -lämpötila -anturi desinfiointikaapissa

PT1000 -lämpötila -anturi, jota käytetään desinfiointikaappeissa

,
Yleisenä kodinlaitteena, Desinfiointikaappeja käytetään laajasti elintarvikkeiden desinfiointiin ja terveydenhuoltoon kodeissa ja kaupallisissa paikoissa. Desinfiointikaappeissa, PT1000 -lämpötila -anturit ovat erittäin tärkeä laite desinfiointikaapin lämpötilan mittaamiseksi ja hallitsemiseksi.
Appearance and structure of PTC thermistor for air heating
Custom sizes of PTC thermistors for air heating

PTC Thermistor for Air Heating

PTC Thermostatic Heater for Internal Insulation of Instrument and Equipment Chassis in Low-Temperature Environments
Paikkamerkki

PTC -termistori vakiona lämpötilan lämmitykseen

Tuotteen yleiskatsaus PTC -termistorin vakiolämpötilan lämmitysominaisuudet vakiolämpötilassa määritetään materiaalilla
PTC Heating Element 12V, 220V, 110V Thermistor Heater Constant Temperature Thermostat Heater Plate
Metal shell PTC heater

PTC Thermistors for Constant Temperature Heating

PTC constant temperature heaters are heating devices designed to utilize the constant temperature heating characteristics of PTC thermistors. In low- and medium-power heating applications, PTC heaters offer advantages over traditional heating elements, such as constant temperature heating, no open flames, high heat conversion efficiency, minimal influence from power supply voltage, and a long lifespan. Their use in electric heating appliances is increasingly favored by R&D engineers.
PTC Thermistors for Energy-Saving Lamps and Ballasts
PTC Thermistors for Energy-Saving Lamps and Ballasts

PTC Thermistors for Energy-Saving Lamps and Ballasts

PTC thermistors are used in electronic ballasts and energy-saving lamps as preheating and soft-start devices. They can significantly increase the number of cycles and lifespan of lamps. "YAXUN" has dedicated over ten years to the research and production of preheating and soft-start PTC thermistors, accumulating extensive experience. Adhering to the business philosophy of "Integrity as the Foundation, Innovation as the Priority," we provide customers with stable and reliable products, earning the trust of our customers. Our thermistors are used by world-renowned electric lighting companies such as Philips, GE (Kiina), IKEA, Megaman, Osram (Kiina), and TCL. With annual production and sales exceeding 100 million units, we hold a leading market share among our peers both domestically and internationally.
Appearance and structure of a submersible liquid heater with a PTC
Submersible Liquid Heater PTC Application Design

PTC Thermistors for Liquid Heating

PTC thermistors for liquid heating are particularly suitable for high-end products requiring high safety and longevity. PTCs offer excellent performance as liquid insulation components. Compared to conventional electric wire heaters, PTC thermistors for liquid heating eliminate the need for a temperature control system and are also cost-effective.
PTC Thermistors for RS232 and RS485 Communication Protection
PTC Thermistors for RS232 and RS485 Communication Protection

PTC Thermistors for RS232 and RS485

PTC thermistors are widely used in RS232/RS485 communication interface protection. They primarily provide dual protection against overcurrent and overvoltage, while also possessing self-recovery properties.
Ptf 30 - Sulakkeen pidike 5 x 20 mm 10mohm 250 V 10a musta
Panel Mount Fuse Holder With Finger Grip Cap For Use With 5 x 20 mm Fuse

Ptf 30 5mΩ Fuse holder for cylindrical fuses 5x20mm 10A on panel

,
5x20MM cylindrical Fuses PTF 30 Fuse holder in miniature design; Panel mounting and solder connection; Finger-grip and screwdriver slot equipped fuse carrier with screw socket. This panel mount fuse holder is ideal for mounting through 0.8mm to 2.8mm panel walls, is UL rated at 20 amps at 250 volts and has solder connectors. The finger grip cap holds the 5x20mm glass fuses.
Ptf 70 - Sulakkeen pidike 5 x 20 mm 10mohm 250 V 10a musta
Stelvio Kontek PTF 70 Fuse holder; cylindrical fuses; 5x20mm; 10A; on panel; musta

Ptf 70 Bakelite -sulakepidikkeet, 10A, paneelikiinnitys sulake -laatikko, 5x20 mm: n sulake

,
The Stelvio Kontek PTF-70 is a panel mount fuse holder with a screw cap for use with 5 x 20 mm glass fuses with a UL rating of 10A at 250Vac and uses tab wire connections.
UL, CSA, VDE -sertifioidut sulakkeen haltijamallit: R3-9a, R3-11, R3-12, R3-13, R3-14, R3-18, R3-22a, R3-24, R3-54B, R3-55, R3-45; PTF-50, PTF-45, PTF-40, PTF-15, PTF-78, PTF-35, FH-B02, OP520.
Panel Mount lHolder Accepts 5x20mm Glass Fuse, Slotted Bayonet Cap, 10 A, 250 V, UL

PTF-40-paneelin kiinnitys sulakkeen pidike sylinterimäisille sulakkeille 5x20mm 10a

,
UL, CSA, VDE -sertifioidut sulakkeen haltijamallit: R3-9a, R3-11, R3-12, R3-13, R3-14, R3-18, R3-22a, R3-24, R3-54B, R3-55, R3-45; PTF-50, PTF-45, PTF-40, PTF-15, PTF-78, PTF-35, FH-B02, OP520.
R3-13 250V 10A Fuse Holder UL Certified Fuse Block for 6x30 6x32 Tube Fuses
China Custom of R3-13 Fuse Holder R3-13 Panel Mount Fuse Holders

R3-12/13 5X20MM, 6X30MM Fuse Holder 10A 125V/250V UL Fuse Box

6*30mm 3AG fuse Panel Mount Fuse Holders R3-9 13 14C 44 22 53 fuse 6X32 high temperature 10A at YAXUN. Fuse Holders Screw Cap 10A 250 VAC TUV . 187 Inch Male Tabs Termination – .250 Inch x 1.25 Inch Fuse Size – Black Phenolic CSA cURus. R3-13 Fuse Holder are a product manufactured by Chin. Tarjoamme kustannustehokkaita ratkaisuja sulakkeen haltijalle, varmistaa oikea -aikaiset toimitukset ympäri maailmaa.