Tootekategooriad
- termiline kaitse 32
- pinnale kinnitatavad kaitsmed 12
- termistor 36
- PCB kinnitus kaitsme hoidik 27
- Juhtmestik 6
- Tera kaitsmehoidjad 17
- termostaat 50
- Elektri kaitsme 24
- Autotemperatuuri andur 7
- Soojuslüliti 22
- Kaitsmekastihoidja 36
- Temperatuuriandur 75
- Termiline lüliti 68
- Autokaitsja 20
- Kinnitage kaitsmed 8
Tootesildid
TAMURA NEC Microtemp termokaitsme TF väljalülitus kuivati küttekeha jaoks
Termiline väljalülitus (TCO) on ülekuumenemiskaitsekomponent. When the temperature inside the device or system exceeds the preset safety value, the TCO disconnects the circuit to prevent damage to the device or fire. This type of fuse is often used in electronic equipment, automobiles, and industrial equipment to provide additional safety. This article summarizes the working principle, structural characteristics, process flow, selection parameters, and design considerations of the thermal fuse.

TAMURA / SET Termokaitsme kontakti tüüp
Notes on the installation of thermal fuse:
1. Plii painutamise kasutamisel, it should be bent from a part more than 6 mm from the root; Painutamisel, do not damage the roots and leads, and do not pull, vajutage, or twist the leads forcibly.
2. Kui termokaitse on kruvidega kinnitatud, riveting or binding posts, it should be able to prevent mechanical creep and poor contact.
3. The connecting parts should be able to work reliably within the working range of the electrical product without displacement due to vibration and shock.
4. When welding the lead wire, the heating humidity should be limited to a minimum, and no high temperature should be applied to the thermal fuse; Do not forcibly pull, vajutage, or twist thermal fuses and leads; After welding, it should be cooled for more than 30 seconds immediately.
5. The thermal fuse can only be used under the conditions of the specified rated voltage, current and specified temperature. Pay particular attention to the maximum continuous temperature that the thermal link can withstand.
Märkus: Nominal current, lead length and temperature can be Designed according to customer requirements.
N-F Series
Thermal Fuse Features
Fusing temperature thermal fuse accurate, high withstand voltage, väike suurus, and temperature resistance.
Belonging unrecoverable type thermal fuses. Temperature fuse melting off, even if the surrounding temperature falls, it will not be turned on.
Use insulating housing.
No lead (Pb) and cadmium (Cd), and comply with RoHS.
REACH does not contain the specified 46 categories SVHC (SVHC).
Thermal Fuse Size

TAMURA Thermal Fuse
| Kaabli pikkus | Dimensions (mm) | ||||
| A | B | C | D | E | |
| Standard N-F | 4.1±0.1 | 5.2±0.1 | 2.0±0.1 | 0.53±0.05 | 36±3.0 |
| Long N-F(L) | 4.1±0.1 | 5.2±0.1 | 2.0±0.1 | 0.53±0.05 | 68±3.0 |
| Mudel | Rated temperature Tf(℃) |
Töötemperatuur (℃) |
Nimivool (A) |
Nimipinge (V) |
maintaining the temperature Th(℃) |
Maximum temperature limit Tm(℃) |
| N06F | 65 | 61±3 | 1.0 | AC250 | 50 | 200 |
| N0F | 76 | 72±3 | 1.0 | AC250 | 50 | 200 |
| N1F | 86 | 81±2 | 1.0 | AC250 | 60 | 200 |
| N2F | 102 | 98±3 | 1.0 | AC250 | 75 | 200 |
| N3F | 115 | 111±2 | 1.0 | AC250 | 95 | 200 |
| N4F | 127 | 123±2 | 1.0 | AC250 | 105 | 200 |
| N13F | 133 | 129±3 | 1.0 | AC250 | 105 | 200 |
| N5F | 136 | 131±2 | 1.0 | AC250 | 100 | 200 |
| N6F | 139 | 134±2 | 1.0 | AC250 | 110 | 200 |
| N7F |
Võtke meiega ühendust
Ootan teie meili, vastame teile sees 12 tundi väärtusliku teabega, mida vajate.
English
Afrikaans
العربية
বাংলা
bosanski jezik
Български
Català
粤语
中文(简体)
中文(漢字)
Hrvatski
Čeština
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
हिन्दी; हिंदी
Magyar
Bahasa Indonesia
Italiano
日本語
한국어
Latviešu valoda
Lietuvių kalba
македонски јазик
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Українська
اردو
Tiếng Việt
