Mikromeditsiiniline raadiosagedusliku ablatsioonielektroodi temperatuuriandur

Medical surface temperature sensor
Product introduction:
φ0,30 mm PI toruga pakendatud meditsiiniline temperatuuriandur. See toode on miniatuurne meditsiinilise raadiosagedusliku ablatsioonielektroodi temperatuuriandur. Toode kasutab epoksüvaigu kapseldamiseks polüimiidtoru, mille välisläbimõõt on kuni 0,30 mm, ja juhttraat kasutab emailitud traati, mille välisläbimõõt on 0,05 mm. Miniatuurse termistori anduri takistuse väärtus kalibreeritakse ükshaaval.

Medical surface temperature sensor, täielikud tootemudelid, usaldusväärne kvaliteet. 1Vastupidavus K kuni 680K on valikuline, kasutusiga kuni 10 aastat. Meditsiiniline temperatuuriandur, auto andur, kodumasina sensorkiip kasutab ülitäpset kiipi, reageerimisaeg võib ulatuda 0.5 sekundit.

The chip is epoxy encapsulated and can be equipped with a 6.3mm mono audio plug (other plugs can also be equipped according to customer requirements). The measurement temperature tolerance is within (25℃ ~ 45 ℃)±0,1 ℃, compatible with YSI400 series temperature sensors.

Product features
PI maxφ0.30mm
Enameled wire OD0.05mm
Quick response
Töötemperatuuri vahemik: 0℃~100℃

Product application
Monitoring ablation temperature detection

Product structure and size (Unit: mm)

Meditsiinilise temperatuurianduri valik

Meditsiiniline temperatuuriandur

Temperatuuriandur ablatsiooni temperatuuri tuvastamise jälgimiseks

Packing quantity: 1 pcs/packing

2.252kΩ or 10kΩ RT temperature resistance table for medical sensors

Monitoring ablation temperature detection temperature sensor product structure and size

Ettevaatusabinõud
— Purpose of this product: temperature measurement and control.
— Control the energy dissipation generated by the current flowing through the chip within the required range to avoid measurement errors caused by self-heating of the component.
— If the shrink sleeve is heated at the temperature sensing head, the air outlet of the welding gun should be more than 30mm away from the temperature sensing head to avoid excessive thermal shock of the resistor body caused by high temperature, resulting in resistance drift.
— Storage temperature 0℃～50℃, humidity 30%~80%RH; avoid storage in an environment with corrosive gas or direct sunlight; after opening the package, it needs to be resealed for storage.
— In view of the structural characteristics of epoxy components, users should avoid excessive stretching and bending forces from the lead wires on the component encapsulation head when using it. If the lead wire needs to be bent, the bending point or force point should be controlled on the lead wire 6mm below the encapsulation head to avoid pulling the chip, causing resistance drift or even open circuit, especially when the component is heated.

Teenused
1. Teie päringule vastatakse aja jooksul 24 tundi;
2. Hästi koolitatud ja kogenud töötajad on alati teie teenistuses.
3. Unikaalsed disaintooted ja paljud privaatsed vormitooted ootavad teie valikut.
4. Kaitske rangelt oma isiklikku teavet ja oma disainiideid.

KKK

Q1. Kas mul on NTC tellimuse näidis?, PT100, PT1000, TTA-d, ja Ds18b20 SENSOR?
A: Jah, tervitame proovitellimust kvaliteedi testimiseks ja kontrollimiseks. Segaproovid on vastuvõetavad.