ntc 10K 15K 20K 50K 3950 1% Датчик температури ntc датчик датчика для котла холодильника

Функція датчика температури побутової техніки

Від кондиціонерів, холодильники, пральні машини, до електрочайників, тостери, тостери, кавові машини, тощо, Датчик температури побутової техніки можна використовувати для оцифровки відповідної інформації та функціональності результатів даних для інтелектуального оновлення продукту.

Продовжуйте читати

Ультрамалий 2,7 К 47 К 50 К 75 К 150 К 300 К 3990 3550 3435 датчик температури MF58 NTC зі скляним покриттям

Ультрамалий датчик температури для батарей

Датчик температури — це датчик інтегрованої схеми, який вимірює температуру за Цельсієм і забезпечує вихідну напругу, лінійно пропорційну температурі. Його можна використовувати в різних сферах застосування, наприклад, у мікрохвильових печах, холодильники, кондиціонери, і моніторинг температури води.

Продовжуйте читати

NTC термістор із скляними кульками

Упаковка та вибір датчика термістора NTC

При виборі термістора, дійсно необхідно всебічно враховувати багато ключових параметрів і упаковку (Інкапсуляція епоксидної смоли, Інкапсуляція скляних кульок, тонкоплівкова інкапсуляція, SMD інкапсуляція, Інкапсуляція зонда з нержавіючої сталі, покриття для лиття під тиском). Дозвольте розповісти вам докладно:

Продовжуйте читати

NTC Thermistors 2.5Ω, 5Ω, 10Ω, 100ох & 3950, 3435

Resistance Range and Application of Thermistors

‌ The resistance range of thermistors is wide, and the resistance of NTC thermistors can range from tens of ohms to ten thousand ohms, and even special devices can be customized according to needs. Commonly used resistance values ​​are 2.5Ω, 5ох, 10ох, тощо, and common resistance errors are ±15%, ±20%, ±30%, тощо. The resistance range of PTC thermistors is usually from 1KΩ to hundreds of KΩ.

Продовжуйте читати

RS485 TTL MODBUS RTU serial port remote acquisition of 10K 3950 NTC temperature sensor

Accuracy and Response Time of Thermistor Sensors

‌Reasonable arrangement of temperature sensors‌: The location and arrangement of temperature sensors will also affect the response time. If the contact area between the sensor and the object being measured is large, the heat exchange will be faster and the response time will naturally be shorter. Проте, please note that too large a contact area may also lead to increased measurement errors, so we have to make a trade-off based on the actual situation.

Продовжуйте читати

Temperature alarm of thermistor sensor

Several Application Cases of Thermistor Sensors

As a component that can change the resistance value according to temperature changes, thermistors have a wide range of applications (such as temperature measurement, temperature control, temperature compensation, temperature alarm, battery thermal protection). Let me share with you several application cases of thermistors:

Продовжуйте читати

Wiring of NTC thermistor temperature sensor

Wiring of NTC Thermistor Temperature Sensor

The connection method of the NTC thermistor temperature sensor needs to be determined according to the actual application scenario and measurement requirements. During the wiring process, be sure to pay attention to the pin polarity, wire selection, temperature range, filtering and decoupling, grounding treatment, and verification and calibration to ensure the accuracy and reliability of the measurement.

Продовжуйте читати

Differences Between Pt100 and Pt1000 Sensors

The main difference between a Pt100 and a Pt1000 sensor is their nominal resistance at 0°C, with a Pt100 having a resistance of 100 ohms and a Pt1000 having a resistance of 1000 Ом, meaning the Pt1000 has a significantly higher resistance, making it more suitable for applications where precise temperature measurement is needed with minimal influence from lead wire resistance, especially in 2-wire circuit configurations;

Продовжуйте читати

Wheatstone bridge connection and LTspice simulation model

3-Wire Measurement Solution for PT100 (RTD) датчик

PT100, the full name of platinum thermal resistor, is a resistive temperature sensor made of platinum (Pt), and its resistance value changes with temperature. The 100 after PT means that its resistance value is 100 ohms at 0℃, and its resistance value is about 138.5 ohms at 100℃.

Продовжуйте читати

TPE injection temperature sensor RTD PT100 for pipes

What is the Difference Between 2-, 3-, and 4-Wire RTD Sensors?

This article explores 2-, 3-, and 4-wire configurations for resistance temperature detectors (RTD), focusing on how environmental factors, accuracy requirements, cost, and wire configuration affect selection. The 4-wire configuration is complex but offers the highest accuracy, while the 2-wire configuration has advantages in lower-accuracy applications. Choosing a configuration requires a combination of application requirements and practical conditions.

Продовжуйте читати