10ரைஸ் குக்கருக்கான 250V RY RH வெப்பநிலை உருகி, மின் விசிறி

10செயலுக்கு முன் 250V RY RH வெப்ப உருகி:
The metal shell of the SF type overheat fuse contains a movable electrode, a spring and a thermistor. Spring B is installed in a compressed state, and the spring force is used to make lead A, movable electrode, metal shell and lead B conductive.

After the RY RH thermal fuse is activated:
When the ambient temperature exceeds the fuse action temperature, the heat transferred through the metal shell melts the thermistor particles, and springs A and B are both extended, but the elastic force in the A direction is large, forcing spring B to press toward the B side, thereby disconnecting lead A and the movable electrode to cut off the circuit.

2: Thermal circuit breaker (SM type)
The low melting point alloy is installed in the ceramic shell as a heat-sensitive material. Its cut-off current is 0.5A, 1A, and 2A. It has the advantage of being directly installed at the temperature detection location.

சன்யுவான் வெப்ப உருகி RY தொடர் வெப்பநிலை உருகி 250V 10A

quality Alloy Type 250V 10A, 15A, 20A Square Thermal Fuses

10A,20A,16ஒரு 250V RY RH வெப்ப உருகி இணைப்புகள்

Principle:
Before action:
Lead A and lead B are connected to the circuit together with the fusible element. The outer surface of the rotator is covered with flux.
After operation:
The temperature of the fusible material rises with the rise of the ambient temperature, and it melts soon. Under the action of the flux and the surface tension of the fusible material, it instantly forms a ball, அதன் மூலம் சுற்று துண்டிக்கப்பட்டது.

4. Features and uses
1. அம்சங்கள்:
அ. Because of its small size, it is very sensitive to the ambient temperature.
பி. Due to its airtight structure, the change caused by aging is very small, and it has a very high operating temperature.
c. It is a non-recovery type, and it will not recover even if the temperature drops after operation.
2. Uses:
I. மின்சார அடுப்புகள், electric hot tables, electric carpets, kerosene fan heaters, warm air blowers.
I. மின்சார இரும்புகள், trouser presses, hot hair dryers, முடி உலர்த்திகள், rechargeable shavers.
Iii. Air conditioners, ventilating fans, சலவை இயந்திரங்கள், முதலியன.
வி. Refrigerators, color TVs, fluorescent lamps, முதலியன.
வி. Electric rice cookers, grills, காபி பானைகள், electric money cookers.

Common installation methods include:
Welding, splicing, and welding
(1) Installation position: more than 5 mm from the fuse body.
(2) Do not allow the welding heat to cause the temperature to exceed the fuse action temperature during welding.
Solutions:
அ. Clamp the tool or fixture near the shell to dissipate heat;
பி. Shorten the operation time;
c. Reduce the welding temperature;
ஈ. Weld away from the fuse body.
(3) Do not increase the resistance during splicing or welding.
If the resistance of the connection part is too large, abnormal heating will cause the fuse to operate when the power is turned on. Especially in splicing situations, the resistance will increase due to thermal cycles or temperature.
(4) After installation, do not pull, press, or twist the lead wire.
(5) Do not allow the resin-sealed lead wire to contact the fuse body. If contact is made, the current can be transmitted to the other end through the metal shell, and the purpose of cutting off the circuit cannot be achieved.
(6) The SF type cannot contact the metal part of the installation part.
(7) When crimping, the rear part cannot be loose, and copper crimping terminals are suitable.
(8) The installation location should be where the machine is prone to failure and generates the most abnormal heat.

தயாரிப்பு விளக்கம்

DYE 250V 15A 16A Thermal Cutoff Fuse Thermal Cutout Link DF104S DF184S DF192S

தயாரிப்பு விளக்கம்

The Thermal DF Series Thermal Cutoffs are single action devices that open when

a preset temperature is reached. They do not reset. The active component of a thermal

cutoff is an electrically insulated thermal pellet. This pellet holds a spring loaded

contact against a fixed contact under normal operating temperatures. (See Fig. 1)

When the preset temperature of the cutoff is reached, the pellet liquifies, the springs

relax, and the spring loaded contact is moved away from the fixed contact, opening the

சுற்று. The DF Series is the right choice for applications requiring an inexpensive

limit protector with 15A capability.

தயாரிப்பு அம்சங்கள்

மதிப்பிடப்பட்ட மின்னோட்டம்: UL 250V 10A/16A, VDE 15A, CCC 15A

Advantage: One shot operation, stable and precise, compact, durable and reliable by hermetic seal structure, excellently sensitive to ambient temperature.

செயல்பாடு: வெப்ப உருகி, Widely Used in Electric Current Appliance as Heat Protection. When temperatures exceed the specified TF level, Electrical Contacts will Open.

விண்ணப்பங்கள்: Suitable for electric home appliances, electric industrial equipment, office automation equipment, plain paper copiers, மின்மாற்றிகள், மோட்டார்கள், முதலியன.

விவரக்குறிப்பு

(SEFUSE SF-E thermal fuse, வெப்ப வெட்டு, வெப்ப இணைப்பு)

Opening Temperature Tolerance: TF+0°C/-5°C

வெப்பநிலை மதிப்பீடு (Tf):மதிப்பிடப்பட்ட தொடக்க வெப்பநிலை

வைத்திருக்கும் வெப்பநிலை (த):Maximum temperature measured at the case end ofthe thermal cutoff at which the thermal cutoff can be maintained for a period for 168 திறக்காமல் மணிநேரம்.

அதிகபட்ச வெப்பநிலை (டி.எம்):ஒரு திறந்த சுற்று என 10 நிமிடங்களுக்கு வெப்பக் கட்ஆஃப் பராமரிக்கப்பட்டு, அதன்பின் இருமுறை மதிப்பிடப்பட்ட மின்னழுத்தத்தில் ஒரு காலத்திற்கு பராமரிக்கப்படும் அதிகபட்ச வெப்பநிலை 2 அதன் இயந்திர மற்றும் மின் பண்புகள் பாதிக்கப்படாத நிமிடங்கள்