PT100 Temperature sensor
2 / 3 wire PT100 Temperature Sensor Probe
Short Length RTD Probe Pt100 3 Wire Design with a 2 inch Long x 1/4" Diameter Stainless Steel Sheath and 40 Inches of PFA Lead Wire. A PT100 is the most common type of Resistance Temperature Detector (RTD). With a resistance of 100 Ohms at 0°C and 138.5 Ohms at 100°C. RTDs are categorised into industrial, as well as general purpose. You can find the datasheets in each product type here. Each type is available as a PT100, PT250, PT500 and PT1000.
Application of Temperature Probe Sensors?
Thermal resistor, thermocouple, digital sensor chip NTC, PTC, PT100, DS18B20 Temperature probe sensors are widely used in many fields. Here are some of the main application areas: temperature probe sensors are widely used in many fields, and they provide important technical support for temperature monitoring and control in various industries. If you have specific application scenarios or needs, I can provide you with more detailed selection and usage suggestions.
Energy Storage CCS PT100 / PT1000 Sensor & Cable Assembly Solution
Pt100 and Pt1000 are the most widely used RTD sensors Cable. Although similar, their different nominal resistances determine which applications they will suit. Available in two versions: as a thin film sensor and as a wire sensor, which differ in the permissible measurement current and the operating temperature range.
How to Select High Accuracy ntc Temperature Sensor?
NTC thermistor has a high resistance at low temperature, and as the temperature increases the resistance decreases rapidly. Therefore NTCs offer the benefit of highly accurate and quick response times to very small changes in temperature. NTC thermistors are available with high accuracy, but typically over much narrower temperature ranges, such as 0 °C to +70 °C.
NTC Thermistor Sensor Probe Assembly
NTC cable probe assembly with metal tube, silicone cable. Series: FTR2SIL Measuring Range: -50 to 180 °C Sensor: NTC, Pt100 or Pt1000 Cable Material: Silicon. This probe consists of a NTC thermistor soldered to a 24 AWG Stranded TPE cable and potted in a copper housing. The assembly is leaving over molded. The NTC Thermistor sensor system uses NTC sensor elements 1K, 2K, 5K, 10K, 100K, 1000K; B values 3375k, 3470K, 3950K, 3700k, 3935k, 3380k, 3450k, 3550k, 3600k, 3977k, 3950k.
NTC, PTC, PT100, DS18B20 for Temperature Probe Sensors
Thermocouple probe: It uses the thermoelectric effect to measure temperature, and has the characteristics of a wide measurement range and fast response speed.
Thermal resistance probe: uses the property that the resistance of metal or semiconductor materials changes with temperature to measure temperature, and has the characteristics of high measurement accuracy and good stability.
Semiconductor probe: uses the property that the conductivity of semiconductor materials changes with temperature to measure temperature, and has the characteristics of small size, light weight and low power consumption.
English
Afrikaans
العربية
বাংলা
bosanski jezik
Български
Català
粤语
中文(简体)
中文(漢字)
Hrvatski
Čeština
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
हिन्दी; हिंदी
Magyar
Bahasa Indonesia
Italiano
日本語
한국어
Latviešu valoda
Lietuvių kalba
македонски јазик
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Українська
اردو
Tiếng Việt