வெப்ப சுவிட்ச்
Customized Motor Thermal Protector (Thermostatic Switch)
A thermally protected motor is equipped with a safety device that shuts off the power supply if the motor’s temperature exceeds a safe limit, preventing damage from overheating. This protection is usually built into the motor itself and is a common feature in various applications, including industrial equipment, எச்.வி.ஐ.சி அமைப்புகள், and even home appliances.
Defrost Low Temperature Thermal Cutoff Switch
Defrost Thermal Cutoff Switch Feature:1. Use the defrost temperature control switch + thermal fuse harness : Refrigerators are generally equipped with a cooling regulator. Users can adjust the temperature inside the refrigerator by turning the knob of the cooling regulator. Generally speaking, the temperature adjustment range is 1℃-7℃, and users can adjust it freely according to their needs.
Defrost Temperature Switch + thermal fuse harness
Refrigerator defrost thermal switch + cable: The defrost thermostat detects the ambient temperature through a temperature sensor. These sensors convert the detected temperature values into electrical signals, which are then passed to the control circuit for processing.
Disc 3/4″ Snap Disc Limit Temp Control Switch, Open on Rise 36T Thermostat
China Made to replace White Rodgers 3L01-250 3/4″ Snap Disc Limit Temp Control Switch (Emerson 3L02-200, 3L05, 3L01-180, ), Cut-In- 115 Degrees F, Cut-Out – 130 Degrees F (Open on Rise).
Disc Self Hold Thermal CUT OUT & Resistor Combination
The KSD301 / KSD302 series self-hold thermal cut-outs have an internal heater to stop them from auto-resetting. This means they can be located remotely and reset by switching off the applied voltage. KSD series 1/2″ , 3/4”disc manual-reset thermal cutouts offer extra thermal protection where auto-resetting devices are not desirable.
German McCormick Thermik S06 120.05 150.05 125.05 motor thermostat switch
Product series: ST06 motor thermostat switch Replaces German McCormick Thermik S06 S06 120.05 150.05 125.05
Electrical parameters: 6,3 அ ~ 25 A
Normal closed;
Automatic reset;
With connecting wire;
Normal closed;
Automatic reset;
With connecting wire;
Polyester film – Nomex paper insulation;
Hair dryer SEKI ST-12 snap action thermal switch
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
High-current, high-power bi-metal snap Disc Thermostats
High-current, high-power bimetal snap-on thermostat and temperature switch. The thermostat produced by YAXUN has stable performance and large current. At present, it is a domestic enterprise that has obtained TUV and UL safety certification through 50A and 60A current.
JUC-31F/KSD-01F/67F040 Temperature Switch TO220 bimetal thermal Control Thermostat
JUC-31F/KSD-01F/67F040 Temperature Switch (Normally Opened) TO220 plug-in bimetal thermal Control Thermostat for Testers Cooling Air Conditioning. JUC 31F Series TO-220 PCB-Bimetal Disc Thermostat meets RoHs standards. As a snap action SPST bimetallic thermostat, it gives accurate regulation for one device.
மோட்டார் பவர்-ஆஃப் மீட்டமைப்பிற்கான கிளிக்சன் 3 எம்.பி+பி.டி.சி ஓவர்லோட் ப்ரொடெக்டர்
3MP+PTC தற்போதைய ஓவர்லோட் பாதுகாப்பான் (பவர்-ஆஃப் மீட்டமைப்பு செயல்பாட்டுடன்)
பி.டி.சி சுய-நீட்சி செயல்பாடு: அதிக சுமை பயணிக்கும்போது, மின்சார விநியோகத்தை துண்டித்த பிறகு அதை தானாக இயக்க முடியும்.
தாமத பாதுகாப்பு செயல்பாட்டுடன். இது டெக்சாஸ் இன்ஸ்ட்ரூமென்ட்ஸ் கிளிக்சன் for இன் தனியுரிம தொழில்நுட்பத்துடன் தயாரிக்கப்படுகிறது.
KSD301 10A 250V NC / NO Thermostat Temperature Switch Thermal control Switch
KSD301 NC / NO (Normally open/normally closed) Thermal control Switch Electrical Rating : 16A 125V AC (Resistive Load). 10A 250V AC Thermostat. 16A 250V AC. Operating Temp : 50 ~ 230℃ (UL.CUL 205℃). bimetal reaction,auto-reset thermostar, plastic thermostat shell, fixed protector holder.