Vanntett 1-leder DS18B20 digital temperatursensor

Dette produktet er den vanntette versjonen av TPE overmolding 1-Wire DS18B20 temperatursensor for Arduino, spesielt designet for temperaturmålinger i fjerne eller fuktige omgivelser. Denne digitale temperatursensoren har et bredt temperaturområde på IP68 -55°C til 125°C, but we recommend keeping the included PVC / TPE jacketed cable below 110°C to ensure optimal performance and durability.

All weather/submersible digital temperature probe, specifically designed to be used in the field Arduino. This sealed digital temperature probe lets you precisely measure temperatures in wet environments with an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling.

The overmolding DS18B20 waterproof temperature sensor is a digital sensor that maintains signal integrity even over long distances. It utilizes a 1-Wire interface, connecting to a central microprocessor through a single wire (along with a ground wire). This design simplifies installation and connection, making it particularly suitable for arduino systems operating within the 3V~5.5V range.

DS18B20 temperatursensor med overstøping 6.3 Lydplugg

Overstøping temperaturfølersonde for kjøleskap, frysere

Waterproof DS18B20 temperature sensor plug, koblingsenhet

Each DS18B20 temperature sensor has a unique silicon serial number, useful for verifying its authenticity and enabling the connection of multiple sensors on a single 1-Wire bus. This feature facilitates the installation of temperature sensors in various locations for applications like indoor temperature monitoring, smart home integration, object temperature detection, greenhouse farming, og mer.

With our plugable terminal, there is no soldering required to connect to our IO Expansion Shield. This allows you to conveniently integrate the DS18B20 temperature sensor into your project, saving you time and effort.

This is a pre-wired and waterproofed version of the DS18B20 sensor all weather/submersible temperature probe, specifically designed to be used in the field.

The DS18B20 does not require any external calibration or trimming to provide typical accuracies

Multiple thermometers can be connected on the same wire because every one has it’s own internal address.

Funksjoner
Usable temperature range: -55 til 125°C (-67°F til +257 °F)
9 til 12 bit valgbar oppløsning
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
±0.5°C Accuracy from -10°C to +85°C
Temperature-limit alarm system
Usable with 3.3V to 5V power/data
Vanntett

Output leads: rød (VCC), blue or yellow (DATA), svart (GND)

Technical performance
1. Teknisk ytelsesbeskrivelse:
①. Unik entråds grensesnittmodus. Når DS18B20 er koblet til en mikroprosessor, it only needs 1-Wire to realize two-way communication between the microprocessor and DS18B20.

②. Temperaturmåleområde: -55℃～+125℃, inherent temperature measurement error (note, not resolution, it was wrong before) 1℃.
③. Støtte flerpunkts nettverksfunksjon. Flere DS18B20 kan kobles parallelt på de eneste tre ledningene, and up to 8 kan kobles parallelt for å realisere flerpunkts temperaturmåling. Hvis tallet er for stort, strømforsyningsspenningen vil være for lav, som resulterer i ustabil signaloverføring.
④. Fungerende strømforsyning: 3.0~5,5V/DC (datalinje parasittisk strømforsyning kan brukes).
⑤. Ingen perifere komponenter er nødvendig under bruk.
⑥. The measurement results are transmitted serially in 9~12-bit digital quantity mode.
⑦. Diameteren på beskyttelsesrøret i rustfritt stål er Φ6.
⑧ 、Applicable to temperature measurement of industrial pipelines of various media of DN15~25, DN40~DN250 and equipment in narrow space.
⑨、Standard installation thread M10X1, M12X1,5, G1/2” optional.
⑩ 、Overmolding PVC cable direct outlet or German ball-type junction box outlet, easy to connect with other electrical equipment. DS18B20+ and Maxim Integrated Information Manufactured by Maxim Integrated, DS18B20+ is a temperature sensor.

Bruksområde:
Dette produktet er egnet for temperaturmåling og kontroll i frysere, kornmagasiner, lagertanker, telekommunikasjonsrom, kraftrom, kabelkanaler, osv.
Temperature measurement and control of industrial equipment in narrow spaces such as bearings, sylindere, textile machinery, Klimaanlegg, osv.
Klimaanlegg til biler, kjøleskap, frysere, og middels og lav temperatur tørkeovner, osv.
Heat measurement of heating/refrigeration pipelines, household heat measurement of central air conditioners, and temperature measurement and control in industrial fields.

Model Specifications
Model Temperature Measurement Range Mounting Thread Cable Length Applicable Pipes
TS-18B20 -55~125 None 1.5 m
TS-18B20A -55~125 M10X1 1.5m DN15~25
TS-18B20B -55~125 1/2”G ​​Junction Box DN40~ 60

Tjenester
1. Din henvendelse vil bli besvart innen 24 timer;
2. Godt trent og erfarent personale står alltid til tjeneste.
3. Unike designprodukter og mange private muggprodukter venter på ditt valg.
4. Beskytt din private informasjon og dine designideer strengt.
FAQ

Q1. Kan jeg få en prøvebestilling for NTC, PT100, PT1000, RTS, og Ds18b20 SENSOR?
EN: Ja, Vi ønsker velkommen prøvebestilling for å teste og sjekke kvalitet. Blandede prøver er akseptable.