Forskjellen mellom termisk sikringskobling og termisk avskjæringsbryter

EN “termisk sikringskobling (Tråd av smeltbar legering og organisk termisk sikring)” er i hovedsak en engangs smeltbar cut-off, varmefølsom komponent som permanent bryter en krets når den når en bestemt temperatur. mens a “termisk avskjæringsbryter” er en bimetallisk stripeenhet som potensielt kan kutte av seg selv etter å ha nådd en høy temperatur, slik at kretsen kobles til igjen når temperaturen synker under et settpunkt. both are used as safety mechanisms to protect against overheating, but the key difference is the “fuse link” is designed to only operate once, while the “cutoff switch” can potentially cycle multiple times.

SF129E SEFUSE 10A 250V Thermal Fuses 133 Degrees Celsius Thermal Cutoffs	Termisk sikring (Cut-Off or Temperature Fuse or TF) 184°C 15A 125VAC 10A 250VAC	Temperature Fuse Axial Type 122 TF Thermal Cutoff 115C 2A 250V
77 Degrees Celsius thermal fuse link Overheating protection element. Nominell spenning: 250V ; Merkestrøm: 10EN ; Rated Operating temperature: 77° C.. Funksjoner & Advantages: Strong stability & Good conductivity & Lang levetid & Flame retardant insulation. Widely Application: AEC77E Thermal Fuses are used in hair dryers, riskokere, irons, kjøleskap, kaffetraktere, microwaves, ovens and other devices. Humanized packaging for easy storage and use. Please confirm the temperature degree, voltage and amp before purchasing. Er avviklet av produsenten : Nei Package Dimensions ‏ : ‎ 5.59 x 1.97 x 0.67 tommer; 0.01 unser Dato først tilgjengelig ‏ : ‎ December 26, 2016 Produsent : ‎ China YAXUN Bestselgerrangering: #2 n Tools & Home Improvement (Se Topp 10 in Tools & Home Improvement)#6 in Cartridge Fuses

KSD9700 250V 5A 15~150 Degree Bimetal Disc Thermal Cutoff Switch

bimetallic strip thermal cutoff switch device For electric Fan heaters

Type termisk sikringskobling og termisk avskjæringsbryter

Key points about thermal fuse links:
One-time use: Once activated by excessive heat, the fusible link melts and permanently breaks the circuit, requiring replacement.
Simple design: Typically consists of a low-melting point alloy that melts when heated above a predetermined temperature.
No reset function: Cannot be reset manually after activation.

KitchenAid OE KSD301-160 Microwave Thermal Cutoff Switch KMCS1016GSS

Erstatning 279769 Termisk avskjæring for Crosley, Eiendom, Kenmore, Kitchenaid, Roper, Whirlpool tørketromler

Normalt stengt / Open Thermostat Thermal Cut-Off 50°C to 150°C

Key points about bimetallic thermal cutoff switches:
Tilbakestillbar:
When the temperature drops below the set point, the switch contacts reconnect, allowing current to flow again.
More complex design:
Often uses bimetallic strips that bend or expand when heated, causing the switch to activate.
Potential for multiple cycles:
Can be used in applications where temporary overheating may occur, unlike a thermal fuse link.

The Thermal Cutoff Switch with SPST-NC-NO contact configuration and quick connect terminals.
1000VAC for One minutes or more between non-live metal parts and terminals dielectric strength;
100MΩ or More between the non-live metal parts and terminals insulation resistance;
12 month limited warranty *view Terms & Conditions for details;
96% of customers would recommend to a friend;
Søknader
Sensing & Instrumentation, Automotive Systems, Automation & Process Control
Bytte temperatur: 150° C.
Contact Operation: Normalt stengt
Reset Temperature: 135° C.
Sensor Terminals : Quick Connect
Contact Rating : 125VAC/15A, 250VAC/10A, 250VAC/16A

Thermal Fuse Link and Thermal Cutoff Switch Function and Application