Medicīniskās vienreizējās lietošanas temperatūras zonde, NTC sensors OD 2,3 mm zonde

Medical thermistor temperature sensors (NTC, PT100) are also very important physiological signal measurements in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature. There are medical sensor probes for rectum, esophagus, and body surface. The wire is soft and comfortable, non-toxic, and all medical grade materials are used.

Vienreizējās lietošanas medicīniskās ādas temperatūras sensora zonde

Medicīniskās taisnās zarnas un barības vada temperatūras sensora zonde

Disposable medical temperature sensor for children

Introduction to disposable body medical temperature sensor probes
1. Today’s patient care requires body temperature monitoring, and temperature monitoring is also a very important physiological signal measurement in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature.
2. There are probes for rectum, esophagus, and body surface.
3. The wire is soft and comfortable, non-toxic, and all medical grade materials are used in accordance with ANSI/AAMIEC53-1995 and GB706.1-995.
4. Latex-free.

Indications of disposable medical temperature sensor probes
Disposable temperature sensor probes are matched with multi-parameter monitors with temperature monitoring functions, and are suitable for one-time use when collecting and transmitting patient temperature signals.

Principle of disposable temperature sensor probes
Medical temperature probes can provide continuous temperature management for patients more accurately, safely and comfortably, and such temperature probes play an increasingly important role in the prognosis period during anesthesia and after perioperative period.

Features of disposable medical temperature sensor probes
1. Accurate and anti-interference skin temperature probe: The temperature probe is an embedded design, and the measured part is in direct contact with human skin. The probe chip has high sensitivity and can continuously and accurately provide patient temperature data; the top reflective layer can block external temperature interference.
2. Safe and comfortable foam, medical surgical grade film: low-viscosity foam, fixed temperature measurement position, and a layer of medical surgical film on the bottom is comfortable and non-irritating to the skin, especially for infants and children.
3. Safe, uzticams, and no cross-infection: Insulation protection does not pose a risk of electric shock to patients; disposable, in line with hospital infection requirements, and no cross-infection to patients. Safe and reliable connection design prevents liquid inflow and ensures data accuracy.

Advantages of disposable medical temperature sensor probe
1. Adopting high-precision thermistor, it can continuously and accurately provide clinical temperature data to meet clinical temperature measurement needs.
2. Disposable use to prevent cross infection between patients.
3. Complete specifications to meet the temperature detection needs of adults, children, infants and newborns.
4. The adhesive surface treated with optimized technology makes the skin feel almost no stimulation or pressure.
5. The back of the surface temperature sensor probe is equipped with reflective silver paper foam to prevent interference from external heat sources, and the foam adhesive film does not damage the skin.
6. The ear canal temperature sensor probe adopts a double soft memory foam design, which can reduce the risk of damaging the tympanic membrane and block the influence of external heat sources.
7. Widely compatible with medical monitors currently on the market.

Apraksts

VEIDS:	Body Cavity Temperature Probe	B25/50:	3950Kandids, 3977Kandids, 3435Kandids
Sensora galva:	O Gredzens, Dakša Metāls, Injicēta caurule, KNL, M16, bezaudas tērauda caurule	Stieple:	CL2 PT4,#24 2466,#28 1332
Lietošana:	Body Cavity Temperature Probe, Tūlītēji ūdens sildītāji, ūdens sildītājs, gaisa kondicionieris, ledusskapis, ūdens strūklaka, indukcijas plīts, kafijas automāts	Pn (nominālā jauda):	50mw
Augsta gaisma:	EPCOS / AVX / Semitec /Subara / Mitsubishi / Ohizumi ntc termistora sensors, Virsmas stiprinājuma temperatūras sensors

Body Cavity Temperature Probe Wire 0.5M~10M Theory Signal Output Origin.

Specifikācijas nosaukums	Darbības joma	Atklāšanas stāvoklis
R25(nominālā pretestības vērtība)	1kandids, 2kandids, 2.7kandids, 3kandids, 5kandids, 10kandids, 15kandids, 20kandids, 30kandids, 40kandids, 47kandids, 50kandids, 100kandids, 200kandids (EPCOS / AVX / Semitec /Subara / Mitsubishi / OHIZUMI NTC termistors)	Pastāvīga temperatūra 25℃±0,05℃
R25 Pieļaujamā novirze(%)	±1,±2, ±3, ±5, ±10	Pastāvīga temperatūra 25℃±0,05℃
B25/50 vai B25/85(materiāla koeficients)(termiskās jutības indekss)	2500~5000K	Pastāvīga temperatūra 25℃±0,05℃ Pastāvīga temperatūra 85℃±0,05℃
B25/50 Vērtības pieļaujamā novirze(%)	±1,±2	Pastāvīga temperatūra 25℃±0,05℃ Pastāvīga temperatūra 50℃±0,05℃
∫(izkliedes koeficients)	≥0,8 mw/℃	Statika gaisā
T(termiskā laika konstante)	≤25S	Statika gaisā
Sejas(Darba temperatūra)	-30℃ ~+120 ℃
Pn (nominālā jauda)	50mw	darba temperatūras robežās
Korpuss un galva		Dakšas galva, O gredzena galva,ūdens galvas pilieni, Metāla korpuss, Vītņu vara korpuss, injekcijas galviņa, bezaudas tērauda caurule, vai pēc klienta zīmējuma
Svina stieple		#24 30# 2651, Ul4411 28#, dubultvadu vadītājs un tā tālāk, vai pēc klienta pieprasījuma.
Terminālis		Var kniedēt atbilstoši dažādu termināļu prasībām

Pakalpojumi
1. Uz jūsu pieprasījumu tiks atbildēts laikā 24 stundas;
2. Labi apmācīti un pieredzējuši darbinieki vienmēr ir jūsu rīcībā.
3. Unikāli dizaina izstrādājumi un daudzi privātie veidņu izstrādājumi gaida jūsu izvēli.
4. Stingri aizsargājiet savu privāto informāciju un dizaina idejas.

FAQ

Q1. Vai es varu saņemt NTC pasūtījuma paraugu?, PT100, PT1000, RTS, un Ds18b20 SENSOR?
Izšķirt: Jā, mēs atzinīgi vērtējam pasūtījuma paraugu, lai pārbaudītu un pārbaudītu kvalitāti. Jaukti paraugi ir pieņemami.