Bimetāla diska termostats

Bimetāla diska termostats ( Termisko izslēgšanas slēdžu komplekts, snap disks Termiskā slēdža komplekts) novērš žāvētāja pārkaršanu, kad žāvētāja augšējā robeža Termiskais slēdzis neizdodas slēgtas ķēdes stāvoklī.

Bimetāla diska termostats ( Termisko izslēgšanas slēdžu komplekts, snap disks Termiskā slēdža komplekts) novērš žāvētāja pārkaršanu, kad žāvētāja augšējā robeža Termiskais slēdzis neizdodas slēgtas ķēdes stāvoklī. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 grādi pēc Fārenheita, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

Technical Parameters
1. Elektriskie parametri: 1) CQC, Vde, Uls, CUL? AC250V 50 ~60Hz 5A / 10Izšķirt / 15Izšķirt (pretestības slodze)
2) UL maiņstrāva 125V 50Hz 15A (pretestības slodze)
2. Darba temperatūras diapazons: 0 ~ 240 °C (pēc izvēles), temperatūras precizitāte: ± 2 ± 3 ± 5 ± 10 °C
3. The difference between recovery and action temperature: 8 ~ 100 ℃ (pēc izvēles)
4. Elektroinstalācijas metode: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, biezums 0.5, 0.8mm pēc izvēles)
5. Kalpošanas laiks: ≥100,000 times
6. Elektriskā izturība: AC 50Hz 1800V 1 min, nav mirgošanas, nav bojājumu
7. Kontakta pretestība: ≤50mΩ
8. Izolācijas pretestība: ≥100MΩ
9. Kontaktforma: Parasti slēgts: temperatūras paaugstināšanās, kontakts atvērts, temperatūras kritums, kontakts atvērts;
Parasti atvērts: Temperature rises, contacts turn on, temperatūra pazeminās, contacts turn off
10. Enclosure protection level: IP00
11. Zemējuma metode: Connected to the grounded metal parts of the device through the thermostat metal case.
12. Uzstādīšanas metode: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
Funkcijas
Tam ir stabilas veiktspējas īpašības, augsta precizitāte, mazs izmērs, viegls svars, augsta uzticamība, ilgs mūžs, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

žāvētājs Thermal Cut-Off slēdži

žāvētājs Thermal Cut-Off slēdži

Sazinieties ar mums

Gaidot jūsu e -pastu, Mēs jums atbildēsim 12 stundas ar nepieciešamo vērtīgo informāciju.

Saistītie produkti

Pieprasiet cenu

Aizpildiet mūsu citāta pieprasījuma veidlapu, un mēs pēc iespējas ātrāk atbildēsim uz jūsu ziņojumu!