termiskais aizsargs
China Temp Control Disc 3/4″ Limit Snap Thermostat With High Current
These precision custom 3/4″ bimetal Limit Snap Disc Thermostats can be used in high current applications; pārvadājot līdz AC 110V/400V, 15A-60A AMPS-240 volti, for over 100,000 cycles. A 3/4″ bimetal thermodisc at the heart of our thermostat is set to a precise temperature range within -5°~393°F (-20°-200°C). Product certification: Tuvs, Cekuls, UL, CUL, CQC.
China TO-220 Disc Thermostat Thermal Switch Supplier
China Custom TO-220 Thermal Cutoff Switch JUC-31F/ KSD-01F instead Airpax® 6700 series Subminiature Thermostat. JUC-31F/ KSD-01F is a RoHS compliant, positive snap action, single pole / single throw, a subminiature bimetallic thermostat that provides accurate and reliable sensing and switching in a single device.
Custom KSD301 1/2″ Snap Action Bimetal Disc Thermostat in China
Bimetal Snap Action Temperature Control: The KSD301 Phenolic resin (ceramic on request) series of 1/2” bimetal temperature controls from YAXUN Electric offers proven reliability in a compact, cost-effective design. The KSD301 has a wide variety of applications to be used as a safety limit(hi-limit) or a regulation controller.
Defrost Low Temperature Thermal Cutoff Switch
Defrost Thermal Cutoff Switch Feature:1. Use the defrost temperature control switch + thermal fuse harness : Refrigerators are generally equipped with a cooling regulator. Users can adjust the temperature inside the refrigerator by turning the knob of the cooling regulator. Generally speaking, the temperature adjustment range is 1℃-7℃, and users can adjust it freely according to their needs.
Defrost Temperature Switch + thermal fuse harness
Refrigerator defrost thermal switch + cable: The defrost thermostat detects the ambient temperature through a temperature sensor. These sensors convert the detected temperature values into electrical signals, which are then passed to the control circuit for processing.
Disc Self Hold Thermal CUT OUT & Resistor Combination
The KSD301 / KSD302 series self-hold thermal cut-outs have an internal heater to stop them from auto-resetting. This means they can be located remotely and reset by switching off the applied voltage. KSD series 1/2″ , 3/4”disc manual-reset thermal cutouts offer extra thermal protection where auto-resetting devices are not desirable.
Emerson G4 / G5 series microtemp 10A / 20A thermal fuse
Emerson Group production MICROTEMP® G4 G5 series thermal fuse, According to different product specifications, Rated load current, respectively, up to AC250V 10A, AC120V 15A and DC24V 5A. To provide reliable protection against overheating, In the same industry products, MICROTEMP® G4 G5 series thermal fuse has established its flagship status can not be shaken.
German McCormick Thermik S06 120.05 150.05 125.05 motor thermostat switch
Product series: ST06 motor thermostat switch Replaces German McCormick Thermik S06 S06 120.05 150.05 125.05
Electrical parameters: 6,3 A ~ 25 Izšķirt
Normal closed;
Automātiska atiestatīšana;
With connecting wire;
Normal closed;
Automātiska atiestatīšana;
With connecting wire;
Polyester film – Nomex paper insulation;
JUC-31F/KSD-01F/67F040 Temperatūras slēdzis līdz 220 bimetāla termiskās kontroles termostats
JUC-31F/KSD-01F/67F040 temperatūras slēdzis (Parasti atvērts) To220 spraudņa bimetāla termiskā vadības termostats testētājiem dzesēšanas gaisa kondicionēšanai. JUC 31F sērija līdz 220 PCB-bimetāla diska termostats atbilst ROHS standartiem. Kā Snap Action SPST bimetāla termostats, Tas vienai ierīcei dod precīzu regulējumu.
KSD301 10A 250V NC / Nav termostata temperatūras slēdža termiskās vadības slēdzis
KSD301 NC / NO (Parasti atvērts/parasti aizvērts) Termiskā vadības slēdža elektriskais vērtējums : 16A 125 V AC (Pretestības slodze). 10250 V maiņstrāvas termostats. 16250 V maiņstrāvas. Darbības temperatūra : 50 ~ 230 ℃ (Ul.cul 205 ℃). bimetāla reakcija,auto-reset termostar, plastmasas termostata apvalks, fiksēts aizsargu turētājs.
KSD301 bimetāla sensora termiskais slēdzis, Pielāgots bimetāla sensora termostats
KSD galvenais princips 301 sērijas auto / Manuāla atiestatīšanas termostats ir tāds, ka viena bimetālu disku funkcija ir snapēta darbība, mainot sensoru temperatūru. Diska snap darbība var virzīt kontaktu darbību caur iekšējo struktūru, un pēc tam beidzot izraisīja ārpus ķēdes.
KSD9700 termiskais slēdzis NC nav temp Control Thermostat 5A / 1015-160C
Pielāgots KSD9700 termostats, -20~ 180c parasti atvērts / Parasti slēgta temperatūras slēdža modulis, Termiskais slēdzis, N.O 5A,10Izšķirt,15, 20Metāla /plastmasas zondes temperatūras kontroliera detektors mājsaimniecības ierīcei. Produkti izturēja ul, Vde, Tuvs, Cekuls, CQC sertifikācija.