Temperatūras sensors
10K NTC Thermistor Temp Sensor 78.7 Inch Stainless Steel Sensitive Probe for Air Conditioner
10K NTC Thermistor Temp Sensor 78.7 Inch Stainless Steel Sensitive Probe for Air Conditioner, Cable and connector can be Customized.
NTC 10K high-accuracy temperature sensor, measuring temperature range: -30°C to +120°C (-22°F to +248°F);
2 / 3 wire PT100 Temperature Sensor Probe
Short Length RTD Probe Pt100 3 Wire Design with a 2 inch Long x 1/4″ Diameter Stainless Steel Sheath and 40 Inches of PFA Lead Wire. A PT100 is the most common type of Resistance Temperature Detector (RTD). With a resistance of 100 Ohms at 0°C and 138.5 Ohms at 100°C. RTDs are categorised into industrial, as well as general purpose. You can find the datasheets in each product type here. Each type is available as a PT100, PT250, PT500 and PT1000.
5 metre NTC Temperature Sensor Probe for use with SMSCOM controllers
NTC Temperature Probe for use with SMSCOM controllers. NTC Thermistors are non-linear resistors, which alter their resistance characteristics with temperature. Our NTC Temperature Sensor probes use with Temperature control, available for surface, air-gas, HVACR, liquid and patient monitoring applications and are configured with a variety of housings and styles.
Air conditioning temperature measurement NTC temperature sensing probe
YAXUN Developing air conditioner gas NTC sensor probes assembly that comply with latest international standards. The air conditioner temperature sensor is a negative temperature coefficient thermistor, referred to as NTC, also known as a temperature probe.
Temperatūras zondes sensoru pielietojums?
Termiskais rezistors, termopārs, Digitālā sensora mikroshēma NTC, Ptc, PT100, DS18B20 Temperatūras zondes sensori tiek plaši izmantoti daudzās jomās. Šeit ir dažas no galvenajām pieteikšanās jomām: Temperatūras zondes sensori tiek plaši izmantoti daudzās jomās, un tie nodrošina svarīgu tehnisko atbalstu temperatūras uzraudzībai un kontrolei dažādās nozarēs. Ja jums ir īpaši lietojumprogrammu scenāriji vai vajadzības, Es varu jums sniegt sīkāku izvēli un lietošanas ieteikumus.
Car Water Temperature Sensor Plug (for Radiator Cooling Fan)
The water temperature sensor is the core component of the car cooling system. Its core component is the NTC thermistor, which is installed on the engine cylinder head or water channel. This component looks simple, but it is actually very critical to engine control. It will directly affect the ECU’s adjustment of the injection amount and ignition timing.
Ķīna pielāgota NTC sensora zonde un kabelis
Tāpat kā sensors, tas parasti ir sadalīts: NTC termistora zonde, PT100 zonde, PT1000 zonde, DS18B20 zonde, ūdens temperatūras zonde, Automobiļu sensora zonde, RTDS zonde, temperatūras kontroles zonde, temperatūras regulēšanas zonde, Mājas ierīces sensora zonde, utt..
China Custom NTC Thermistor Sensor Probes
NTC sensor probe stands for “negatīva temperatūras koeficients”, called CTN in French “negatīva temperatūras koeficients”. NTC thermistor sensors are resistors with a negative temperature coefficient, which means that resistance decreases as temperature increases.
China Custom Thermistor sensor Probe Assembly for temperature control
High-End Resistor sensor Probe Manufacturer — YAXUN specializes in thermistor featuring temperature sensitivity and AEC-Q200 qualified. TCTR – NTC Thick Film Thermistor. 47-1.6MΩ. Tightest tolerance 1%. B Value 2410K – 4800Kandids.
Thermistor Temp Sensor — Silicon-Based Linear Thermistors At The Same Cost And Size Of Traditional NTC Thermistors. Achieve High Accuracy System Reliability With The Industry’s Smallest Linear Thermistors.
Ķīnas gaisa kondicionēšanas temperatūras sensora ražotājs
Gaisa kondicionēšanas temperatūras sensors 5k 10k 15k 20k 50k 100k gaisa kondicioniera caurules sensora gumijas galvas vara galva.
China PT100 Temperature Transmitter Supplier
By the transmitter, resistance signal of thermal resistance can convert into 4-20 mA current signal, convenient to use with the computer.
China Supplier of Automotive Exhaust Temperature Sensor
The EGT sensor is responsible for reading the temperatures of the aftertreatment system components such as inlet DOC, inlet DPF, outlet DPF, inlet SCR, outlet SCR, utc, and sending this information back to the ECM to maintain proper temperatures that control the aftertreatment system to reduce the harmful emissions.