KSD301 10A 250V NC / NE Termostato temperatūros jungiklis Šiluminio valdymo jungiklis

KSD301 NC / NE (Paprastai atidarytas / normaliai uždarytas) Termo valdymo jungiklis Elektrinis įvertinimas : 16125V kintamoji srovė (Varžinė apkrova). 10250 V kintamosios srovės termostatas. 16250V kintamoji srovė. Darbinė temp : 50 ~ 230 ℃ (UL.CUL 205 ℃). bimetalinė reakcija,automatiškai atstatomas termostartas, plastikinis termostato korpusas, fiksuotas apsaugos laikiklis. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) temperatūros. At lower temperature the thermostat is closed.

KSD301 temperatūros valdymo jungiklis Termostatas 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

KSD301 temperatūros jungiklio valdymo jutiklio terminis termostatas 50°-160° šleivapėdystė

Produkto aprašymas
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, reliable, no arcing, long service life, and less radio interference. It is mainly used in disinfection cabinets, elektriniai vandens buteliai, kavos puodukai, electronic tile supports, hot water bags, Vandens balionėliai, Plaukų džiovintuvai, dulkių siurbliai, electric heaters, mikrobangų krosnelės, elektriniai lygintuvai, drabužių džiovintuvai, motors and other electrical appliances.

Current Ratinf(Ir): 5A,10A,15A 16A;
Įtampos įvertinimas(Ur):125V 250V ac;
Tf Tolerance: ±5 ℃
Electric intensity: AC2000V 50/60Hz
Kontaktinis pasipriešinimas: less than 50mΩ
Izoliacijos atsparumas: more than 100MΩ
Reagavimo greitis: ≤1℃/min
Life time: more than 30000 ciklai
Approvals: UL TUV CQC

Action Temperature(Tf) & Iš naujo nustatyti temperatūrą(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Paprastai uždaryta: the thermostat is closed(connected) at normal status
Paprastai atidarytas: the thermostat is open(atjungtas) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Standartinis paketas
100vnt maišelyje

Pristatymo terminas:
EXW, DDU, DDP, C&F, FOB

Siuntimo būdai:
Tarptautinis ekspresas, Oru, Prie jūros