Plaukų džiovintuvo SEKI ST-12 greito veikimo termojungiklis

Plaukų džiovintuvo apsauga nuo perkaitimo SEKI ST-12 yra temperatūros reguliatorius, naudojant bimetalą kaip temperatūros jutimo komponentą.. Neleiskite perkaitimo ir šildymo laido perdegimo, kai plaukų džiovintuvas veikia ilgą laiką.

Plaukų džiovintuvo apsauga nuo perkaitimo SEKI ST-12 yra temperatūros reguliatorius, naudojant bimetalą kaip temperatūros jutimo komponentą.. Neleiskite perkaitimo ir šildymo laido perdegimo, kai plaukų džiovintuvas veikia ilgą laiką.

When the hair dryer works normally, the bimetal is in a free state and the contacts are in a closed / open state. Kai temperatūra pasiekia darbinę temperatūrą, the bimetal will quickly act upon the internal stress caused by the heat, opening / closing the contact and cutting / connecting the circuit, thereby controlling the temperature. When the appliance cools down to the reset temperature, the contacts are automatically closed / opened to resume normal working conditions.

The following points should be noted when installing anti-overheating protection SEKI ST-12:

1. When using contact temperature-type installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the effect of temperature sensing, the surface of temperature sensing should be coated with thermal grease or other thermally conductive medium with similar properties.

2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.

3. Do not allow liquid to penetrate into the thermostat, do not make the shell crack, and do not change the shape of the external terminal at will.

4. The product is used in a circuit with a current not greater than 5A, and the copper core cross section should be selected as 0. 5-1㎜2 wire connection; For use in circuits with a current not greater than 10A, the copper core cross section should be 0.75-1.5㎜2 wire connection.

5. The product should be stored in a warehouse with a relative humidity of less than 90%, an ambient temperature below 40 °C, vėdinama, švarus, dry and non-corrosive gas

product description
model:
ST-12 series temperature switch Scope
⑴ hair dryer,
⑵ curlers,
⑶ oven,
⑷ electric heaters,
⑸ popcorn machine,Overheating protection SEKI ST-12

⑹ tableware dryer temperature protection, and other products.


● ST-12 Series Temperature Switch Description:
ST-12 Series Temperature Switch Technical Data
Rated temperature Off temperature Rated temperature Off temperature
55℃ 55±5℃ 105℃ 105±5℃
60℃ 60±5℃ 110℃ 110±5℃
65℃ 65±5℃ 115℃ 115±5℃
70℃ 70±5℃ 120℃ 120±5℃
75℃ 75±5℃ 125℃ 125±5℃
80℃ 80±5℃ 130℃ 130±5℃
85℃ 85±5℃ 135℃ 135±5℃
90℃ 90±5℃ 140℃ 140±5℃
95℃ 95±5℃ 145℃ 145±5℃
100℃ 100±5℃ 150℃ 150±5℃

Iš naujo nustatykite temperatūrą: When below 75 ℃, darbinė temperatūra, operating temperature reset temperature of minus 20 ℃ ± 15 ℃
When the operating temperature at 75 ℃ ~ 100 ℃, operating temperature reset temperature of minus 30 ℃ ± 15 ℃
When the operation temperature above 100 ℃, operating temperature reset temperature is minus 40 ℃ ± 15 ℃

Nominali įtampa (V) Nominali srovė (A)

10125250571015

By certified

⑴ the thermal protection adapted for relative humidity less than 90℅, non-flammable gas and conductive dust exist in general indoor environment.
⑵ thermal protector in the installation process, do not pull pressure shrapnel thermal sensor in order to avoid poor contact, inaccurate temperature.
⑶ prevent dangerous over-temperature components under fault conditions to avoid accidents.

Bakelito keramikos temperatūros valdymo jungiklis plaukų džiovintuvui

Bakelito keramikos temperatūros valdymo jungiklis plaukų džiovintuvui

Temperature switch for hair dryer

Temperature switch for hair dryer

Susisiekite su mumis

Laukiu jūsų el. Pašto, Mes jums atsakysime 12 Valandos su vertinga informacija, kurios jums reikėjo.

Susiję produktai

Paprašyti citatos

Užpildykite savo citatos užklausos formą ir mes kuo greičiau atsakysime į jūsų pranešimą!