Ksd9700 Termostat N.C 5A / 10Bimetalni prekidač za kontrolu temperature

KSD-9700 serija 5A, 10A, 16A, 20A, 25A, 40A, AC 250V 50～60Hz termostat termalni zaštitni prekidač sastoji se od visoko osjetljivog bimetalnog elementa u obliku tanjura, pokretna kontaktna glava, statički kontaktni komad, ploča za glačanje, vanjsko kućište, germalno otporno olovo i tako dalje. The bimetal disc is in free state and the contacts are closed when the electrical appliance is working in normal condition. When the ambient temperature raises to the preset operating temperature, the contacts open as the bimetal disc deforms to jump when being heated, then the circuit is cut off to control the temperature .Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature. The bimetallic element restores to its primary state and contact point is closed . The electric appliance restores its work. The product has many advantages such as small in resistor, puick in temperature feeling, fast in action. Safe and reliable. compact and so on. This product is widely used in home appliance’s motor and electrical equipment, such as air conditioner motor, transformator, thermal appliances, itd.

KSD9700 Bimetalni toplinski zaštitni prekidač

KSD9700 5A 10A 250V termostat za isključivanje topline

KSD9700 Temperature Switch 5A 250V N.O. N.C

Tehnički podaci
Nazivni napon: AC 250V 50～60Hz
Nazivna struja: 5A, 10A, 16A, 20A, 25A, 40A of Resistive Load
Switch Type and Number of poles: 1 pole opener
IP-Protection Degree: IP00
Action Type: 1A
Operation Cycles: 10000 ciklus
Insulation material PTI value : 175V
Resistance of Contact: ≤ 50 mΩ (original state)
Resistance of Insulated : >100MΩ(DC500V normality)
Test Voltage : ≥ 1250V/1min(nomality)
1 ili 2 Temperature Control Switch
Model : KSD9700
Materijal : Metalno kućište
Kontakt : NC(Normal Closed)/NE(Normal Open)
Temperatura : 15°C~155°C
Nazivna snaga : 250V 5A
Lead Wire Length : 7.3cm / 2.9″
Head Dimension : 20 x 7.5 x 3.5mm/0.78″ x 0.3″ x 0.14″(L*W*T)

Mjere opreza pri uporabi:
1. Do not deform or collapse the casing during installation!
2, this product is not suitable for use in the air temperature, only for contact temperature!
(Can be fixed by tie wire, iron wire, fixing seat or 704 silicone rubber)
3, the metal case is charged, not suitable for working in water.
The plastic case should not be immersed in the insulating seal when it is placed in the water.
4. When the product is installed, the temperature control switch should be close to the mounting surface of the controlled appliance.