KSD301 10A 250V NC / NE Prekidač temperature termostata Prekidač toplinske kontrole

KSD301 NC / NE （Normalno otvoren/normalno zatvoren） Električna vrijednost prekidača toplinske kontrole : 16125 V AC (Otporno opterećenje). 10Termostat od 250 V AC. 16250V AC. Radna temp : 50 ~ 230 ℃ (UL.CUL 205 ℃). bimetalna reakcija,auto-reset thermostar, plastično kućište termostata, fiksni držač zaštitnika. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) temperatura. At lower temperature the thermostat is closed.

KSD301 Prekidač za kontrolu temperature Termostat 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

KSD301 Temperaturni prekidač Kontrolni senzor Termalni termostat 50°-160° klupko stopalo

Opis proizvoda
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, pouzdan, no arcing, dug radni vijek, and less radio interference. It is mainly used in disinfection cabinets, električne boce za vodu, posude za kavu, electronic tile supports, hot water bags, aparati za vodu, sušila za kosu, usisivači, električni grijači, mikrovalne pećnice, električna glačala, sušilice rublja, motors and other electrical appliances.

Current Ratinf(I): 5A,10A,15A 16A;
Ocjena napona(Ur):125V 250V ac;
Tf Tolerance: ±5℃
Električni intenzitet: AC2000V 50/60Hz
Kontaktni otpor: less than 50mΩ
Otpor izolacije: more than 100MΩ
Brzina odziva: ≤1℃/min
Life time: more than 30000 ciklusi
Odobrenja: UL TUV CQC

Radna temperatura(Tf) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Normalno zatvoreno: the thermostat is closed(connected) at normal status
Normalno otvoren: the thermostat is open(nepovezan) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Standardni paket
100PCS po torbi

Rok isporuke:
EXW, DDU, DDP, C&F, FOB

Metode dostave:
Međunarodni ekspres, Zračnim putem, Po moru