Sušilo za kosu SEKI ST-12 snap action termalni prekidač

Zaštita od pregrijavanja SEKI ST-12 sušila za kosu je regulator temperature koji koristi bimetal kao komponentu za senzor temperature. Spriječite pregrijavanje i izgaranje grijaće žice kada sušilo za kosu radi duže vrijeme.

When the hair dryer works normally, the bimetal is in a free state and the contacts are in a closed / open state. Kada temperatura dosegne radnu temperaturu, the bimetal will quickly act upon the internal stress caused by the heat, opening / closing the contact and cutting / connecting the circuit, thereby controlling the temperature. When the appliance cools down to the reset temperature, the contacts are automatically closed / opened to resume normal working conditions.

The following points should be noted when installing anti-overheating protection SEKI ST-12:

1. When using contact temperature-type installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the effect of temperature sensing, the surface of temperature sensing should be coated with thermal grease or other thermally conductive medium with similar properties.

2. Nemojte se srušiti, loosen or deform the top of the cover during installation, so as not to affect the performance.

3. Nemojte dopustiti da tekućina prodre u termostat, do not make the shell crack, i nemojte po volji mijenjati oblik vanjskog terminala.

4. The product is used in a circuit with a current not greater than 5A, and the copper core cross section should be selected as 0. 5-1㎜2 wire connection; For use in circuits with a current not greater than 10A, the copper core cross section should be 0.75-1.5㎜2 wire connection.

5. Proizvod treba skladištiti u skladištu s relativnom vlagom manjom od 90%, an ambient temperature below 40 °C, ventiliran, čist, dry and non-corrosive gas

product description
model:
ST-12 series temperature switch Scope
⑴ hair dryer,
⑵ curlers,
⑶ oven,
⑷ electric heaters,
⑸ popcorn machine,Overheating protection SEKI ST-12

⑹ tableware dryer temperature protection, and other products.


● ST-12 Series Temperature Switch Description:
ST-12 Series Temperature Switch Technical Data
Rated temperature Off temperature Rated temperature Off temperature
55℃ 55±5℃ 105℃ 105±5℃
60℃ 60±5℃ 110℃ 110±5℃
65℃ 65±5℃ 115℃ 115±5℃
70℃ 70±5℃ 120℃ 120±5℃
75℃ 75±5℃ 125℃ 125±5℃
80℃ 80±5℃ 130℃ 130±5℃
85℃ 85±5℃ 135℃ 135±5℃
90℃ 90±5℃ 140℃ 140±5℃
95℃ 95±5℃ 145℃ 145±5℃
100℃ 100±5℃ 150℃ 150±5℃

Ponovno postavite temperaturu: When below 75 ℃, operating temperature, operating temperature reset temperature of minus 20 ℃ ± 15 ℃
When the operating temperature at 75 ℃ ~ 100 ℃, operating temperature reset temperature of minus 30 ℃ ± 15 ℃
When the operation temperature above 100 ℃, operating temperature reset temperature is minus 40 ℃ ± 15 ℃

Nazivni napon (V) Nazivna struja (A)

10125250571015

By certified

⑴ the thermal protection adapted for relative humidity less than 90℅, non-flammable gas and conductive dust exist in general indoor environment.
⑵ thermal protector in the installation process, do not pull pressure shrapnel thermal sensor in order to avoid poor contact, inaccurate temperature.
⑶ prevent dangerous over-temperature components under fault conditions to avoid accidents.