محافظ حرارتی گرد مقاوم در برابر فشار Thermik S01

The PTC thermistors and thermal protectors produced by the German THERMIK company are stable products successfully developed in 1968. It enjoys a high reputation in the international market and is recognized as an excellent choice for protecting motors, ترانسفورماتورها, ballasts, ابزار قدرت, OTC. سوئیچ دما (محافظ حرارتی) تولید شده توسط شرکت THERMIK با ابعاد کوچک مشخص می شود, مقاومت در برابر تنش مکانیکی بسیار بالا, مقاومت در برابر ضربه بالا, و پایداری عالی. ترمیستور PTC با اندازه کوچک مشخص می شود, پاسخ سریع, 4 لایه های حفاظتی, وت 3 سرها به صورت سری به هم متصل می شوند. می تواند در سیم پیچ سه فاز موتور دفن شود و از دماهای مختلف محافظت کند. It can also protect key parts such as motor bearings and lubricants; in this field, THERMIK represents high quality, reliability and durability. Tempertur (TPQE): Thermik's first agent/rare distributor/first-level agent/authorized sales in China.

ST01 series temperature switch
Product advantages:
• Same thermal protection function, low price
• Obtained UL and TUV certification, breaking Germany's 30-year monopoly on temperature switches.
• Good airtightness, which can prevent product failure during the vacuum dipping process.
• Small size, suitable for being buried inside the coil.
• Metal shell, can withstand 50KG coil shaping pressure, has good thermal conductivity, and is sensitive to temperature.
• Pure temperature products, the current does not flow through the bimetal, no current heating effect, accurate temperature control.

فناوری:
• Integrate global supply chain resources, and the bimetallic sheet uses materials from the world's largest manufacturer, the United States EMS. The shell adopts the stamping and forming technology of German supplier.
• The reed is made of Japanese NGK material, which is processed and produced by Japanese stamping parts suppliers.
• The shell and reed are silver-plated, which greatly reduces the contact resistance.
• The core components of the two pieces adopt fully automated molding equipment and temperature screening tunnel kiln production testing, with good consistency and stable performance.

Technical Parameters

	With insulation sleeve	S01
1	Contact type	Usually closed
2	Rated switching temperature (NST) هر 5 ℃	60-200℃
3	Standard tolerance	± 5K
4	Reset temperature range according to UL / CSA at rated switching temperature	30K±15K
5	Applied voltage ... AC ... / دی سی	...500V ~/...100V=
6	ولتاژ نامی, AC	250حرفهای\|500حرفهای
7	جریان نامی, alternating current cosφ = 1.0	2.5بوها\|0.75بوها
8	جریان نامی, alternating current cosφ = 0.6	1.6بوها\|0.50بوها
9	Number of switches in In and Un conditions	10.000
10	Current sensitivity in In	خیر
11	Maximum switching current at 250V ~ / number of switching	5.0A/2000
12	Contact bounce time	< 1ام‌اس
13	مقاومت تماسی (refer to MIL-Stand, R5757)	< 50mΩ
14	Impregnation resistance (according to Thermik test)	Fit
15	Vibration resistance at 10-60Hz	100m/s2
16	Casing pressure stability (special test to maximum)	450ن(45kg)
17	High voltage insulation (no C type)	2 کیلوولت
18	Protection level	من
19	اتصال استاندارد	lead 0.25mm2
20	Diameter d (با / without insulation sleeve)	9.4/9.0میلی متر
21	Height h (با / without insulation sleeve)	4.8/4.3میلی متر
22	Insulation sleeve length	16میلی متر
23	Screw / -length	-
24	Wrench size / maximum torque	-
25	Approved according to safety design	VDE.UL.BEAB.CSA.SEMKO

AGENCY FILE NUMBER STANDARD NUMBER APPLICATION
UL E305764 873 Motor protection
VDE 40016121 EN60730-2-2 Motor protection
TUV R50109800 EN60730-2-3 Lighting Protection
TUV R50110965 EN60730-2-9 Thermal cut-out
CB CN5785 IEN60730-2-2 Motor protection
CQC CQC05002013372 GB14536.1 GB14536.3 Motor protection Limit and regulating controls