Digitalni DS18B20 komplet modula temperaturnog senzora vodootporni kabel senzora od 100 cm

1-Wire interface Digital DS18B20 Temperature Sensor, Usable temperature range: -55 do 125°C (-67°F do +257°F) · 9 to 12 bit . DS18B20 3M Cable Digital Temperature Thermal Waterproof Probe Sensor -55°C to +125°C compatible with Arduino and Raspberry Pi Open Source Programming!

Digitalni temperaturni 1-žični senzor DS18B20 Vodonepropusni, 1m

Senzor temperature DS18B20 kompatibilan sa Arduinom i Raspberry Pi

DS18B20 Digitalni temperaturni senzor -55 do 125°C (-67°F do +257°F) Module For Arduino

Kineski prilagođeni digitalni temperaturni senzori dolaze s originalnim DS18B20, visokog kvaliteta u kućištu od nerđajućeg čelika (6 * 30mm) i 3m #24 30# 2651, UL4411 28# Silikonski kabl (120 inches) u dužini.
DS18B20 temperature sensor will enable you to easily measure and read the temperature via available and open-source libraries.
Our DS18B20 temperature sensor is perfect to use with Arduino and Raspberry Pi and other microcontrollers, and due to waterproof cable is also suitable for outdoor use.
Simple temperature readout through ready-to-use open source libraries for the DS18B20 temperature sensor! Wide measuring range from -55°C to +125°C and low deviation of only +/- 0.5°C between -10°C and +85°C!

Naziv proizvoda:	1-Wire DS18B20 Temperature Sensor	Output:	Digital Sensor
Kabl:	Customized	Voltage Supply:	3.0V~5.5V
Radna temperatura:	-55°C ~ 125°C	Max Power:	450mW
Shell Material:	Stainless Steel	Connector:	2.54MM Connector
Drivepipe:	Heat Shrinkable Tube	Feature:	Vodootporan
High Light:	5.5VDC DS18B20 Temperature Sensor use with Arduino and Raspberry Pi

Opis proizvoda
Stainless Steel Package Waterproof Probe NTC Digital Temperature Sensor DS18B20 Temperature Sensor
Output: Digital
Upotreba: Temperature measurement use with Arduino and Raspberry Pi
Cable length: Custom 0.5M, 1M, 2M or more
Theory: Resistance Sensor
Probe material: Stainless Steel
Accuracy: -10~+125℃, the accuracy is±0.5℃
Cable material: PVC, Silicone,PTFE

Description of Digital DS18B20 Temperature Sensor
DS18B20 temperature sensor is composed of DALLAS, Stainless steel probe, cable and connectors. DS18B20 je najčešće korišteni digitalni temperaturni senzor, and its output is digital signal. It has the characteristics of small size, mali hardverski troškovi, jaka sposobnost protiv smetnji i visoka preciznost.

Specification of Digital DS18B20 Temperature Sensor

Digital chip	DS18B20
Power supply	3.0~5.5VDC
Resolution ratio	9~12 bit, Corresponding distinguish temperature are 0.5℃,0.25℃,0.125℃ and 0.0625℃
Tolerancija	-10℃ to +125℃ ±0.5℃
Treatment proccess	Vodootporan
Raspon radne temperature	-50~+125℃ (when the temperature is -10~+85℃, the accuracy is±0.5℃)
Shell size	Diameter:¢6~¢9mm,dužina : 10mm~1000mm
Žica	UL Series(such as UL1007), Supply line number, using temperature range, outside diameter and material requirements.
Shell material	Stainless steel
Connector	Molex, JST, DuPont, CWB, CJT, U type etc.
Drivepipe	Heat shrinkable tube; PVC tube, glass fiber tube;
Connection mode	Crno : GND， Yellow: DATA Red:VDD+

Characteristic of Stainless Steel Digital DS18B20 Temperature Sensor
1. Digital signal output
Wire interface Requires Only one port pin for communication. Requires no external components

2. High Accuracy
Raspon radne temperature:-55°C to +125°C (-67F to +257F), ±0.5°C accuracy from -10°C to +85°C

3. Data Line Power Supply
Can be powered from data line. Opseg napajanja je od 3.0V do 5.5V

4. Fast Response
Thermometer resolution is programmable from 9 to 12 bits.

5. Various Probe Design
Probe dimension :6*30mm, 6*50mm or customized

Application of Waterproof Digital DS18B20 Temperature Sensor
Water Temperature Monitoring, HVAC, Medical Instrument, GPS Oil Tank Temperature Monitoring

FAQ of DS18B20 Temperature Sensor
Q: Where physically on the device does the temperature measurement take place?
A: The DS18B20 does not sense temperature directly through the package. For all package types, the DS18B20 senses temperature primarily through the GND pin. Ensuring a good thermal connection between the GND pin of the device and the heat source you wish to measure will provide the best results.

Q: Is there a way to extend the temperature range of the DS18B20?
A: br, there is not a way to increase the range it reads. The DS18B20 reads with an accuracy of ±0.5°C from -10°C to +85°C and ±2°C accuracy from -55°C to +125°C.