Bimetalni disk termostat

Bimetalni disk termostat ( Komplet termičkih prekidača, Snap disk Komplet termalnih prekidača) sprečava pregrijavanje mašine za sušenje kada gornja granica mašine za sušenje pokvari termalni prekidač u zatvorenom krugu.

Bimetalni disk termostat ( Komplet termičkih prekidača, Snap disk Komplet termalnih prekidača) sprečava pregrijavanje mašine za sušenje kada gornja granica mašine za sušenje pokvari termalni prekidač u zatvorenom krugu. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

Tehnički parametri
1. Electrical parameters: 1) CQC, VDE, UL, CUL? AC250V 50 ~60Hz 5A / 10A / 15A (otporno opterećenje)
2) UL AC 125V 50Hz 15A (otporno opterećenje)
2. Raspon radne temperature: 0 ~ 240 °C (opciono), temperaturnu tačnost: ± 2 ± 3 ± 5 ± 10 °C
3. The difference between recovery and action temperature: 8 ~ 100 ℃ (opciono)
4. Wiring method: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, debljina 0.5, 0.8mm optional)
5. Service life: ≥100,000 times
6. Electrical strength: AC 50Hz 1800V for 1min, nema treperenja, nema kvara
7. Otpor kontakta: ≤50mΩ
8. Otpor izolacije: ≥100MΩ
9. Contact form: Normalno zatvoren: porast temperature, contact open, temperature drop, contact open;
Normalno otvoren: Temperature rises, contacts turn on, temperature drops, contacts turn off
10. Enclosure protection level: IP00
11. Grounding method: Connected to the grounded metal parts of the device through the thermostat metal case.
12. Installation method: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
Karakteristike
It has the characteristics of stable performance, visoka tačnost, male veličine, mala težina, visoka pouzdanost, dug život, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

sušilica Prekidači za termičku isključenost

sušilica Prekidači za termičku isključenost

Kontaktirajte nas

Čekam vaš email, mi ćemo vam odgovoriti unutar 12 sati sa vrijednim informacijama koje su vam potrebne.

POVEZANI PROIZVODI

Zatražite ponudu

Ispunite naš obrazac za ponudu i mi ćemo odgovoriti na vašu poruku u najkraćem mogućem roku!