显示 241-252 个结果(共 325 个结果)

军用设备用 Pt100 温度传感器

航天: 在航空航天领域, PT100传感器用于测量液氧和液氢燃烧室的温度, 涡轮发动机, 燃料电池, ETC. 飞机和航天器的. 高精度, 要求可靠性高、稳定性强.

PT1000温度传感器应用于消毒柜

作为常见的家用电器, 消毒柜广泛用于家庭和商业场所的食品消毒和保健. 消毒柜内, PT1000温度传感器是精确测量和控制消毒柜内温度的非常重要的设备.

PTC热敏电阻用于空气加热

PTC恒温加热器,用于在低温环境中仪器和设备底盘的内部绝缘

用于恒温加热的 PTC 热敏电阻

产品概述 恒温加热用PTC热敏电阻的恒温加热特性是由材料决定的

恒温加热的PTC热敏电阻

PTC恒温加热器是加热设备,旨在利用PTC热敏电阻的恒温加热特性. 低- 和中型加热应用, PTC加热器比传统的供暖元素具有优势, 例如恒温加热, 没有开火, 高热转化效率, 电源电压最小的影响, 和寿命很长. 它们在电气加热设备中的使用越来越受到R的青睐&D工程师.

PTC Thermistors for Energy-Saving Lamps and Ballasts

PTC thermistors are used in electronic ballasts and energy-saving lamps as preheating and soft-start devices. They can significantly increase the number of cycles and lifespan of lamps. "YAXUN" has dedicated over ten years to the research and production of preheating and soft-start PTC thermistors, accumulating extensive experience. Adhering to the business philosophy of "Integrity as the Foundation, Innovation as the Priority," we provide customers with stable and reliable products, earning the trust of our customers. Our thermistors are used by world-renowned electric lighting companies such as Philips, GE (中国), IKEA, Megaman, Osram (中国), and TCL. With annual production and sales exceeding 100 百万单位, we hold a leading market share among our peers both domestically and internationally.

PTC热敏电阻用于液体加热

PTC thermistors for liquid heating are particularly suitable for high-end products requiring high safety and longevity. PTCs offer excellent performance as liquid insulation components. Compared to conventional electric wire heaters, PTC thermistors for liquid heating eliminate the need for a temperature control system and are also cost-effective.

PTC Thermistors for RS232 and RS485

PTC thermistors are widely used in RS232/RS485 communication interface protection. They primarily provide dual protection against overcurrent and overvoltage, while also possessing self-recovery properties.

聚四氟乙烯 30 5mΩ 面板上圆柱形保险丝 5x20mm 10A 保险丝座

5x20MM 圆柱形保险丝 PTF 30 微型设计的保险丝座; 面板安装和焊接连接; 手指握把和螺丝刀槽配备带螺丝插座的保险丝座. 该面板安装保险丝座非常适合穿过 0.8 毫米至 2.8 毫米的面板墙安装, UL 评级为 20 安培数 250 伏并有焊接连接器. 指握帽可容纳 5x20mm 玻璃保险丝.

聚四氟乙烯 70 电木保险丝座, 10A, 面板安装保险丝盒, 适用于 5x20mm 保险丝

Stelvio Kontek PTF-70 是一款带有螺帽的面板安装保险丝座,适用于 5 x 20 mm 玻璃保险丝,250Vac 时 UL 额定值为 10A,并使用接头线连接.

PTF-40 面板安装保险丝座,适用于圆柱形保险丝 5x20mm 10A

UL, CSA, VDE 认证保险丝座型号: R3-9A, R3-11, R3-12, R3-13, R3-14, R3-18, R3-22A, R3-24, R3-54B, R3-55, R3-45; PTF-50, PTF-45, PTF-40, PTF-15, PTF-78, PTF-35, FH-B02, OP520.

R3-12/13 5X20MM, 6X30MM 保险丝座 10A 125V/250V UL 保险丝盒

6*30mm 3AG 保险丝面板安装保险丝座 R3-9 13 14C 44 22 53 亚讯保险丝 6X32 高温 10A. 保险丝座螺旋盖 10A 250 VAC TUV . 187 英制公接头端接 – .250 英寸× 1.25 英制保险丝尺寸 – 黑色酚醛 CSA cURus. R3-13 保险丝座是我公司生产的产品. 我们为保险丝座提供高性价比的解决方案, 确保在世界各地及时交货.