Комплект модуля цифрового датчика температури DS18B20 Водонепроникний кабель датчика 100 см

1-Wire interface Digital DS18B20 Temperature Sensor, Usable temperature range: -55 to 125°C (-67°F to +257°F) · 9 до 12 bit . DS18B20 3M Cable Digital Temperature Thermal Waterproof Probe Sensor -55°C to +125°C compatible with Arduino and Raspberry Pi Open Source Programming!

Цифровий датчик температури 1-Wire DS18B20 Водонепроникний, 1м

Датчик температури DS18B20 сумісний з Arduino і Raspberry Pi

DS18B20 Digital Temperature Sensor -55 to 125°C (-67°F to +257°F) Module For Arduino

Китайські спеціальні цифрові датчики температури постачаються з оригінальним DS18B20, висока якість в корпусі з нержавіючої сталі (6 * 30мм) і 3м #24 30# 2651, UL4411 28# Силіконовий кабель (120 дюймів) в довжину.
DS18B20 temperature sensor will enable you to easily measure and read the temperature via available and open-source libraries.
Our DS18B20 temperature sensor is perfect to use with Arduino and Raspberry Pi and other microcontrollers, and due to waterproof cable is also suitable for outdoor use.
Simple temperature readout through ready-to-use open source libraries for the DS18B20 temperature sensor! Wide measuring range from -55°C to +125°C and low deviation of only +/- 0.5°C between -10°C and +85°C!

Опис товару
Stainless Steel Package Waterproof Probe NTC Digital Temperature Sensor DS18B20 Temperature Sensor
Output: Digital
Використання: Temperature measurement use with Arduino and Raspberry Pi
Довжина кабелю: Custom 0.5M, 1М, 2M or more
Theory: Resistance Sensor
Probe material: Stainless Steel
Точність: -10~+125℃, the accuracy is±0.5℃
Cable material: ПВХ, Silicone,PTFE

Description of Digital DS18B20 Temperature Sensor
DS18B20 temperature sensor is composed of DALLAS, Зонд з нержавіючої сталі, cable and connectors. DS18B20 — широко використовуваний цифровий датчик температури, and its output is digital signal. It has the characteristics of small size, Низький апаратне забезпечення, сильна здатність проти перешкод і висока точність.

Specification of Digital DS18B20 Temperature Sensor

Characteristic of Stainless Steel Digital DS18B20 Temperature Sensor
1. Digital signal output
Wire interface Requires Only one port pin for communication. Requires no external components

2. High Accuracy
Діапазон робочих температур:-55°C до +125 °C (-67F to +257F), ±0.5°C accuracy from -10°C to +85°C

3. Data Line Power Supply
Can be powered from data line. Power supply range is 3.0V to 5.5V

4. Fast Response
Thermometer resolution is programmable from 9 до 12 шматочки.

5. Various Probe Design
Probe dimension :6*30мм, 6*50mm or customized

Application of Waterproof Digital DS18B20 Temperature Sensor
Water Temperature Monitoring, HVAC, Medical Instrument, GPS Oil Tank Temperature Monitoring

FAQ of DS18B20 Temperature Sensor
Q: Where physically on the device does the temperature measurement take place?
A: The DS18B20 does not sense temperature directly through the package. For all package types, the DS18B20 senses temperature primarily through the GND pin. Ensuring a good thermal connection between the GND pin of the device and the heat source you wish to measure will provide the best results.

Q: Is there a way to extend the temperature range of the DS18B20?
A: немає, there is not a way to increase the range it reads. The DS18B20 reads with an accuracy of ±0.5°C from -10°C to +85°C and ±2°C accuracy from -55°C to +125°C.