Skillnaden mellan Thermal Fuse Link och Thermal Cutoff Switch

A “termisk säkringslänk (Smältbar legeringstråd och organisk termisk säkring)” är i huvudsak en engångs smältbar cut off, värmekänslig komponent som permanent bryter en krets när den når en specifik temperatur. medan a “termisk avstängningsbrytare” är en bimetallisk bandanordning som potentiellt kan skära av sig själv efter att ha nått en hög temperatur, så att kretsen kan återanslutas när temperaturen sjunker under ett börvärde. both are used as safety mechanisms to protect against overheating, but the key difference is the “säkringslänk” is designed to only operate once, while the “cutoff switch” can potentially cycle multiple times.

SF129E SEFUSE 10A 250V Thermal Fuses 133 Degrees Celsius Thermal Cutoffs	Termisk säkring (Cut-Off or Temperature Fuse or TF) 184°C 15A 125VAC 10A 250VAC	Temperature Fuse Axial Type 122 TF Thermal Cutoff 115C 2A 250V
77 Degrees Celsius thermal fuse link Overheating protection element. Märkspänning: 250V ; Märkström: 10A ; Rated Operating temperature: 77°C. Funktioner & Fördelar: Strong stability & Good conductivity & Long service life & Flame retardant insulation. Widely Application: AEC77E Thermal Fuses are used in hair dryers, riskokare, järn, kylskåp, kaffebryggare, microwaves, ovens and other devices. Humanized packaging for easy storage and use. Please confirm the temperature degree, voltage and amp before purchasing. Avbryts av tillverkaren : Ingen Package Dimensions ‏ : ‎ 5.59 x 1.97 x 0.67 tum; 0.01 uns Datum först tillgängligt : ‎ December 26, 2016 Tillverkare : ‎ China YAXUN Bästsäljare rankas: #2 n Tools & Home Improvement (Se överst 10 in Tools & Home Improvement)#6 in Cartridge Fuses

KSD9700 250V 5A 15~150 Degree Bimetal Disc Thermal Cutoff Switch

bimetallic strip thermal cutoff switch device For electric Fan heaters

Typ av termisk säkringslänk och termisk avstängningsbrytare

Key points about thermal fuse links:
One-time use: Once activated by excessive heat, the fusible link melts and permanently breaks the circuit, requiring replacement.
Simple design: Typically consists of a low-melting point alloy that melts when heated above a predetermined temperature.
No reset function: Cannot be reset manually after activation.

KitchenAid OE KSD301-160 Microwave Thermal Cutoff Switch KMCS1016GSS

Ersättning 279769 Termisk avstängning för Crosley, Egendom, Kenmore, Kitchenaid, Roper, Whirlpool torktumlare

Normalt stängd / Open Thermostat Thermal Cut-Off 50°C to 150°C

Key points about bimetallic thermal cutoff switches:
Återställbar:
When the temperature drops below the set point, the switch contacts reconnect, allowing current to flow again.
More complex design:
Often uses bimetallic strips that bend or expand when heated, causing the switch to activate.
Potential for multiple cycles:
Can be used in applications where temporary overheating may occur, unlike a thermal fuse link.

The Thermal Cutoff Switch with SPST-NC-NO contact configuration and quick connect terminals.
1000VAC for One minutes or more between non-live metal parts and terminals dielectric strength;
100MΩ or More between the non-live metal parts and terminals insulation resistance;
12 month limited warranty *view Terms & Conditions for details;
96% of customers would recommend to a friend;
Ansökningar
Sensing & Instrumentation, Automotive Systems, Automation & Process Control
Switching Temperature: 150°C
Contact Operation: Normalt stängd
Återställ temperatur: 135°C
Sensor Terminals : Snabbkoppling
Contact Rating : 125VAC/15A, 250VAC/10A, 250VAC/16A

Thermal Fuse Link and Thermal Cutoff Switch Function and Application