Medicinsk engångstemperatursond, NTC-sensor Od 2,3 mm sond

Medical thermistor temperature sensors (NTC, PT100) are also very important physiological signal measurements in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature. There are medical sensor probes for rectum, esophagus, and body surface. The wire is soft and comfortable, non-toxic, and all medical grade materials are used.

Engångssond för medicinsk hudtemperatursensor

Medicinsk rektal och esofagus temperatursensorsond

Disposable medical temperature sensor for children

Introduction to disposable body medical temperature sensor probes
1. Today’s patient care requires body temperature monitoring, and temperature monitoring is also a very important physiological signal measurement in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature.
2. There are probes for rectum, esophagus, and body surface.
3. The wire is soft and comfortable, non-toxic, and all medical grade materials are used in accordance with ANSI/AAMIEC53-1995 and GB706.1-995.
4. Latex-free.

Indications of disposable medical temperature sensor probes
Disposable temperature sensor probes are matched with multi-parameter monitors with temperature monitoring functions, and are suitable for one-time use when collecting and transmitting patient temperature signals.

Principle of disposable temperature sensor probes
Medical temperature probes can provide continuous temperature management for patients more accurately, safely and comfortably, and such temperature probes play an increasingly important role in the prognosis period during anesthesia and after perioperative period.

Features of disposable medical temperature sensor probes
1. Accurate and anti-interference skin temperature probe: The temperature probe is an embedded design, and the measured part is in direct contact with human skin. The probe chip has high sensitivity and can continuously and accurately provide patient temperature data; the top reflective layer can block external temperature interference.
2. Safe and comfortable foam, medical surgical grade film: low-viscosity foam, fixed temperature measurement position, and a layer of medical surgical film on the bottom is comfortable and non-irritating to the skin, especially for infants and children.
3. Safe, pålitlig, and no cross-infection: Insulation protection does not pose a risk of electric shock to patients; disposable, in line with hospital infection requirements, and no cross-infection to patients. Safe and reliable connection design prevents liquid inflow and ensures data accuracy.

Advantages of disposable medical temperature sensor probe
1. Adopting high-precision thermistor, it can continuously and accurately provide clinical temperature data to meet clinical temperature measurement needs.
2. Disposable use to prevent cross infection between patients.
3. Complete specifications to meet the temperature detection needs of adults, children, infants and newborns.
4. The adhesive surface treated with optimized technology makes the skin feel almost no stimulation or pressure.
5. The back of the surface temperature sensor probe is equipped with reflective silver paper foam to prevent interference from external heat sources, and the foam adhesive film does not damage the skin.
6. The ear canal temperature sensor probe adopts a double soft memory foam design, which can reduce the risk of damaging the tympanic membrane and block the influence of external heat sources.
7. Widely compatible with medical monitors currently on the market.

Beskrivning

TYP:	Body Cavity Temperature Probe	B25/50:	3950K, 3977K, 3435K
Sensorhuvud:	O Ring, Gaffel metall, Injicerat rör, Npt, M16, rostfritt stålrör	Tråd:	CL2 PT4, #24 2466,#28 1332
Användande:	Body Cavity Temperature Probe, Snabbvattenberedare, varmvattenberedare, luftkonditionering, kylskåp, vatten fontän, induktionsspis, kaffebryggare	Pn (nominell effekt):	50mw
Högt ljus:	EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC termistorsensor, Ytmonterad temperatursensor

Body Cavity Temperature Probe Wire 0.5M~10M Theory Signal Output Origin.

Specifikationsnamn	Omfattning	Detektionstillstånd
R25(nominellt motståndsvärde)	1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC termistor)	Konstant temperatur 25℃±0,05℃
R25 Tillåten avvikelse(%)	±1,±2, ±3, ±5, ±10	Konstant temperatur 25℃±0,05℃
B25/50 eller B25/85(materialkoefficient)(termiskt känslighetsindex)	2500~5000K	Konstant temperatur 25℃±0,05℃ Konstant temperatur 85℃±0,05℃
B25/50 Värde tillåten avvikelse(%)	±1,±2	Konstant temperatur 25℃±0,05℃ Konstant temperatur 50℃±0,05℃
∫(förlustkoefficient)	≥0,8mw/℃	Statisk i luften
T(termisk tidskonstant)	≤25S	Statisk i luften
Motstående(Arbetstemperatur)	-30℃~+120℃
Pn (märkeffekt)	50mw	inom arbetstemperatur
Fodral och huvud		Gaffelhuvud, O-ringhuvud,droppar vatten huvud, Metallhölje, Gänga kopparfodral, injektionshuvud, rostfritt stålrör, eller enligt kundens ritning
Blytråd		#24 30# 2651, UL4411 28#, dubbeltrådig ledare och så vidare, eller enligt kundens önskemål.
Terminal		Kan nitas enligt kraven från olika terminaler

Tjänster
1. Din förfrågan kommer att besvaras inom 24 timmar;
2. Välutbildad och erfaren personal står alltid till din tjänst.
3. Unika designprodukter och många privata mögelprodukter väntar på ditt val.
4. Skydda strikt din privata information och dina idéer om design.

FAQ

Q1. Kan jag få en provbeställning för NTC, PT100, PT1000, FoTU:er, och Ds18b20 SENSOR?
A: Ja, vi välkomnar provbeställning för att testa och kontrollera kvalitet. Blandade prover är acceptabla.