27 Сеп
Технологија сензора температуре

Сензор температуре ДС18Б20 повезан на МЦУ

ДС18Б20 је најчешће коришћен дигитални сензор температуре. It outputs digital signals, has the characteristics of small size, мали хардверски трошкови, јака способност против сметњи, висока прецизност, and is widely used.

Наставити читање

DS18B20 Temperature Sensing Wire Stainless Steel Probe Kit
27 Сеп
Технологија сензора температуре

Design of DS18B20 Digital Temperature Sensor for STM32

DS18B20 is a digital temperature sensor that uses a single bus timing to communicate with the host. Only 1 Wire is needed to complete the temperature data reading;
DS18B20 has a built-in 64-bit product serial number for easy identification. Multiple DS18B20 sensors can be connected to 1 Жица, and through 64-bit identity authentication, the temperature information collected from different sensors can be read separately.

Наставити читање

Build a simple circuit by connecting DS18B20 digital sensor to Arduino
27 Сеп
Технологија сензора температуре

DS18B20 Digital Temperature Sensor Connect Arduino

Today I will show you how to use the DS18B20 digital temperature sensor with an Arduino so you can measure the temperature of air, liquids such as water, and the ground.
To connect the DS18B20 digital temperature sensor to Arduino, you need to do the following steps:
‌Hardware connection‌:
Connect the VCC pin of DS18B20 to the 3.3V power pin of Arduino.
Connect the GND pin of DS18B20 to the ground pin of Arduino.
Connect the data pin of DS18B20 to the GPIO pin of Arduino (на пример, GPIO4).
Connect a 4.7kΩ pull-up resistor between the data pin and the 3.3V power pin.

Наставити читање

Advantages of NTC Thermistor Sensors in Coffee Machines
20 Сеп
Технологија сензора температуре

NTC Thermistor Sensors Selection and Application | High Accuracy and Precision

High Accuracy and Precision NTC thermistors Sensors are used in various industries, from medical to industrial applications. The medical industry relies on NTC’s in various applications including catheters, dialysis equipment, and patient monitoring. This medical sensor part is 1355 Ohms at 37°C with Beta 25/85 оф 3976.

Наставити читање

04 Јун
Технологија сензора температуре

ПТ100 / ПТ1000 Актуелна опрема за аквизицију

Метални термички отпорници попут никла, copper and platinum resistors have a positive correlation with the change in resistance with temperature. Платинум има најстабилнија физичка и хемијска својства и најчешће се користи. The temperature measurement range of the commonly used platinum resistor Pt100 is -200～850 ℃. Додатно, the temperature measurement ranges of Pt500, ПТ1000, итд. су узастопно смањени. ПТ1000, temperature measurement range -200～420 ℃. Према међународном стандарду ИЕЦ751, Карактеристике температуре Платинум отпорника ПТ1000 испуњавају следеће захтеве:

Наставити читање