Категории продуктов
- термопредохранитель 32
- предохранители для поверхностного монтажа 12
- термистор 36
- Держатель предохранителя для монтажа на печатной плате 27
- Жгут проводов 6
- Держатели лопастных предохранителей 17
- термостат 50
- Электрический предохранитель 24
- Датчик автомобильной температуры 7
- Тепловой выключатель 22
- Держатель блока предохранителей 36
- Датчик температуры 75
- Термовыключатель 68
- Автомобильный предохранитель 20
- Закрепить предохранители 8
Теги продукта
Немецкий McCormick Thermik S06 120.05 150.05 125.05 переключатель термостата двигателя
Серия продуктов: Переключатель термостата двигателя ST06 Заменяет немецкий McCormick Thermik S06 S06. 120.05 150.05 125.05
Электрические параметры: 6,3 А ~ 25 А
Нормально закрытый;
Автоматический сброс;
С соединительным проводом;
Нормально закрытый;
Автоматический сброс;
С соединительным проводом;
Полиэфирная пленка – Бумажная изоляция Номекс;
Серия продуктов: Переключатель термостата двигателя ST06 Заменяет немецкий McCormick Thermik S06 S06. 120.05 150.05 125.05
Электрические параметры: 6,3 А ~ 25 А
Нормально закрытый;
Автоматический сброс;
С соединительным проводом;
Полиэфирная пленка – Бумажная изоляция Номекс;
Main components of ST06 U1 thermal protector:
1) Ceramic cover 2) Static contact 3) Riveted shaft pin 4) Bimetallic strip 5) Pot 6) Moving contact 7) Shell
Connection structure
The static contact and ceramic cover are riveted together;
The moving contact, bimetallic strip and pot are riveted together through the shaft pin;
The moving contact is in close contact with the static contact under the pre-pressure of the pot; The current passes through the static contact and the moving contact to form a circuit.
Рабочий принцип
When the circuit is working normally, the moving contact and the static contact are in a closed state. When the temperature rises to the operating temperature, the bimetallic strip is deformed by the heat and quickly flips over, and moves downward with the pot piece through the riveted shaft pin, so that the moving contact piece and the static contact are separated and the circuit is cut off. После разрыва цепи, the ambient temperature begins to drop. When it drops to the reset temperature, the bimetallic strip automatically flips back to the initial state, and the pot piece also rebounds to the initial state, so that the moving contact piece and the static contact are reconnected, and the circuit returns to normal working state.
S06 Thermik motor thermostat switch is applicable to Electric equipment, Small motor, Трансформеры, Lighting, electric product, household appliance, the protection of temperature control, thermal overload in circuit board, Communication power supply , импульсный источник питания,UPS power supply, medical power supply, fire power ,the module power supply ,audio amplifier equipment, various types of rechargeable devieces, rectifiers, инверторы, welding equipment ,aerospace instrumentation electronic equipment , automation equipment ,военный, Commercial product temperature control or temperature protection.
S06Imported series temperature protectionTechnical parameters:
Номинальное напряжение:50 / 60HZ, 250В, Атмосфера
Номинальный ток:2.5 (1.6) А / 10 (6.3) A COS phi = 1.0 (0.6)
Rated disconnect temperature range:60~ 200Each5For a file
Reset temperature range: Disconnect the temperature is below30 15K
Аутентификация:UL,ВДЕ,SGS
| Модель | S01 | S06 |
| Contact types | Normally closed/Normally open | Normally closed/Normally open |
| Rated switching temperature (НСТ) Each5A | 35℃-200℃ | 35℃-200℃ |
| Standard Tolerances | 5К | 5К |
| Reset temperature range | 30K 15K | 30K 15K |
| Applying a voltage…Атмосфера… /Ток | … 500V ~ / … 100V ~ = | … 500V ~ / … 100V ~ = |
| Номинальное напряжение, Атмосфера | 250V 500V | 250V 500V |
| Номинальный ток, ACCOS = 1.0 | 2.5A 0.75A | 10.0A 3.5A |
| Номинальный ток, ACCOS = 0.6 | 1.6A 0.50A | 6.3A 2.0A |
| InInAndUnWhen switching times | 10.000 | 10.000 |
| Maximum switching current250V ~ /Switching times | 5.0А / 2000 | 25А / 2000 |
| Contact bounce time | <1РС | <1РС |
| Контактное сопротивление(ReferenceMIL-Stand, R5757) | <50м | <50м |
| Immersion resistance(According toThermikTest) | Suit | Suit |
| Seismic capacity10-60Hz | 100м / s2 | 100м / s2 |
| Уровень защиты | 1 | 1 |
| Стандартное подключение | Lead0.25mm2 | Lead0.75mm2 |
| Diameterd (There is/Without insulating sleeve) | 9.4 / 9.0мм | 9.8 / 9.3мм |
| Heighth (There is/Without insulating sleeve) | 4.8 / 4.3мм | 7.5 / 7.2мм |
| Insulating sleeve length | 16мм | 18 |
Связаться с нами
Жду вашего письма, мы ответим вам в течение 12 часы с ценной информацией, которая вам нужна.
English
Afrikaans
العربية
বাংলা
bosanski jezik
Български
Català
粤语
中文(简体)
中文(漢字)
Hrvatski
Čeština
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
हिन्दी; हिंदी
Magyar
Bahasa Indonesia
Italiano
日本語
한국어
Latviešu valoda
Lietuvių kalba
македонски јазик
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Українська
اردو
Tiếng Việt




