A diferença entre o fusível térmico e o interruptor de corte térmico

UM “link fusível térmico (Fio de liga fusível e fusível térmico orgânico)” é essencialmente um corte fusível único, componente sensível ao calor que interrompe permanentemente um circuito quando atinge uma temperatura específica. enquanto um “interruptor de corte térmico” é um dispositivo de tira bimetálica que pode potencialmente se desligar após atingir uma alta temperatura, permitindo que o circuito se reconecte quando a temperatura cair abaixo de um ponto de ajuste. both are used as safety mechanisms to protect against overheating, but the key difference is the “fuse link” is designed to only operate once, while the “cutoff switch” can potentially cycle multiple times.

SF129E SEFUSE 10A 250V Thermal Fuses 133 Degrees Celsius Thermal Cutoffs	Fusível Térmico (Cut-Off or Temperature Fuse or TF) 184°C 15A 125VAC 10A 250VAC	Temperature Fuse Axial Type 122 TF Thermal Cutoff 115C 2A 250V
77 Degrees Celsius thermal fuse link Overheating protection element. Tensão nominal: 250V ; Corrente nominal: 10UM ; Rated Operating temperature: 77°C. Características & Vantagens: Strong stability & Good conductivity & Long service life & Flame retardant insulation. Widely Application: AEC77E Thermal Fuses are used in hair dryers, panelas elétricas de arroz, ferros, geladeiras, cafeteiras, microwaves, ovens and other devices. Humanized packaging for easy storage and use. Please confirm the temperature degree, voltage and amp before purchasing. Foi descontinuado pelo fabricante : ‎ Não Package Dimensions ‏ : ‎ 5.59 x 1.97 x 0.67 polegadas; 0.01 onças Data disponível pela primeira vez ‏ : ‎ December 26, 2016 Fabricante ‏ : ‎ China YAXUN Classificação dos mais vendidos: #2 n Tools & Home Improvement (Veja o topo 10 in Tools & Home Improvement)#6 in Cartridge Fuses

KSD9700 250V 5A 15~150 Degree Bimetal Disc Thermal Cutoff Switch

bimetallic strip thermal cutoff switch device For electric Fan heaters

Tipo de fusível térmico e interruptor de corte térmico

Key points about thermal fuse links:
One-time use: Once activated by excessive heat, the fusible link melts and permanently breaks the circuit, requiring replacement.
Simple design: Typically consists of a low-melting point alloy that melts when heated above a predetermined temperature.
No reset function: Cannot be reset manually after activation.

KitchenAid OE KSD301-160 Microwave Thermal Cutoff Switch KMCS1016GSS

Substituição 279769 Corte térmico para Crosley, Propriedade, Kenmore, Ajuda de cozinha, Roper, Secadores Whirlpool

Normalmente fechado / Open Thermostat Thermal Cut-Off 50°C to 150°C

Key points about bimetallic thermal cutoff switches:
Reconfigurável:
When the temperature drops below the set point, the switch contacts reconnect, permitindo que a corrente flua novamente.
More complex design:
Often uses bimetallic strips that bend or expand when heated, causing the switch to activate.
Potential for multiple cycles:
Can be used in applications where temporary overheating may occur, unlike a thermal fuse link.

The Thermal Cutoff Switch with SPST-NC-NO contact configuration and quick connect terminals.
1000VAC for One minutes or more between non-live metal parts and terminals dielectric strength;
100MΩ or More between the non-live metal parts and terminals insulation resistance;
12 month limited warranty *view Terms & Conditions for details;
96% of customers would recommend to a friend;
Aplicativos
Sensing & Instrumentation, Automotive Systems, Automation & Process Control
Switching Temperature: 150°C
Contact Operation: Normalmente fechado
Redefinir a temperatura: 135°C
Sensor Terminals : Quick Connect
Contact Rating : 125VAC/15A, 250VAC/10A, 250VAC/16A

Thermal Fuse Link and Thermal Cutoff Switch Function and Application