Sensor suhu permukaan perubatan untuk bayi dengan toleransi ± 0.1 ℃

Medical surface temperature sensor
Product introduction:
Medical body surface temperature sensor is used for human body surface temperature measurement, with product nominal resistance value of 2.252kΩ or 10kΩ. The probe is a stainless steel φ5.6 metal probe, which can be equipped with a 2-pin aviation plug or a 6.3mm audio plug (other plugs can also be equipped according to customer requirements). Toleransi suhu pengukuran adalah (25℃ ~ 45 ℃) ± 0.1 ℃.

Medical surface temperature sensor, Model produk lengkap, kualiti yang boleh dipercayai. 1K hingga 680K Rintangan Pilihan, perkhidmatan hidup hingga 10 tahun. Sensor suhu gred perubatan, Sensor automotif, Cip Sensor Perkakas Rumah Menggunakan Cip Percakapan Tinggi, Masa tindak balas dapat dicapai 0.5 saat.

The chip is epoxy encapsulated and can be equipped with a 6.3mm mono audio plug (other plugs can also be equipped according to customer requirements). The measurement temperature tolerance is within (25℃ ~ 45 ℃)± 0.1 ℃, compatible with YSI400 series temperature sensors.

Ciri -ciri produk:
Epoxy resin encapsulation;
Reusable;
Ketepatan pengukuran yang tinggi (25~45)℃±0.1℃;
Using temperature range 0℃~50℃;

Product application
Used for infant care, supporting monitors, suitable for emergency, intensive care units, operating rooms, dll. Continuously monitor the patient’s body temperature.

Product structure and size (Unit: mm)

Sensor suhu permukaan perubatan untuk bayi dengan toleransi ± 0.1 ℃

Sensor suhu kulit seksual yang boleh diguna semula dengan palam audio 6.3mm

Sensor suhu badan manusia probe dengan cakera keluli tahan karat φ7.0

Packing quantity: 1 pcs/packing

Product structure and dimensions of body surface temperature sensor with 2-pin aviation plug

2.252kΩ or 10kΩ RT temperature resistance table for medical sensors

Langkah berjaga-berjaga
— Purpose of this product: temperature measurement and control.
— Control the energy dissipation generated by the current flowing through the chip within the required range to avoid measurement errors caused by self-heating of the component.
— If the shrink sleeve is heated at the temperature sensing head, the air outlet of the welding gun should be more than 30mm away from the temperature sensing head to avoid excessive thermal shock of the resistor body caused by high temperature, resulting in resistance drift.
— Storage temperature 0℃～50℃, humidity 30%~80%RH; avoid storage in an environment with corrosive gas or direct sunlight; after opening the package, it needs to be resealed for storage.
— In view of the structural characteristics of epoxy components, users should avoid excessive stretching and bending forces from the lead wires on the component encapsulation head when using it. If the lead wire needs to be bent, the bending point or force point should be controlled on the lead wire 6mm below the encapsulation head to avoid pulling the chip, causing resistance drift or even open circuit, especially when the component is heated.

Perkhidmatan
1. Pertanyaan anda akan dijawab dalam 24 jam;
2. Kakitangan yang terlatih dan berpengalaman sentiasa berada di perkhidmatan anda.
3. Produk reka bentuk yang unik dan banyak produk acuan peribadi sedang menunggu pilihan anda.
4. Lindungi maklumat peribadi anda dengan tegas dan idea reka bentuk anda.

Soalan Lazim

Q1. Bolehkah saya mempunyai pesanan sampel untuk ntc, PT100, PT1000, RTS, dan sensor DS18B20?
A: Ya, Kami mengalu -alukan pesanan sampel untuk menguji dan memeriksa kualiti. Sampel bercampur boleh diterima.