Kategori produk
Tag produk
Medical Disposable Temperature Probe, NTC Sensor Od 2.3mm probe
Penggunaan probe sensor suhu NTC di penutup atas periuk nasi, Atas periuk nasi penutup komersial, Tutup Tempatan Mengukur Aksesori 23.62 x 0.39 x 0.39 inci; 0.48 auns. Epcos / Avx / Semitec /Subara / Mitsubishi / Sensor Thermistor Ohizumi NTC, Sensor suhu gunung permukaan. Perion Nasi Mengenai Sensor Suhu– Masa tindak balas yang cepat untuk penyesuaian segera ke kuasa pemanasan: dengan masa tindak balas yang cepat, Siasatan ini membolehkan pelarasan segera kepada kuasa pemanasan untuk mengekalkan suhu yang dikehendaki.
Medical thermistor temperature sensors (NTC, PT100) are also very important physiological signal measurements in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature. There are medical sensor probes for rectum, esophagus, and body surface. The wire is soft and comfortable, non-toxic, and all medical grade materials are used.
Introduction to disposable body medical temperature sensor probes
1. Today’s patient care requires body temperature monitoring, and temperature monitoring is also a very important physiological signal measurement in OR, ICU, and CCU. YAXUN can provide a complete set of reusable and disposable temperature probes to measure the patient’s body temperature.
2. There are probes for rectum, esophagus, and body surface.
3. The wire is soft and comfortable, non-toxic, and all medical grade materials are used in accordance with ANSI/AAMIEC53-1995 and GB706.1-995.
4. Latex-free.
Indications of disposable medical temperature sensor probes
Disposable temperature sensor probes are matched with multi-parameter monitors with temperature monitoring functions, and are suitable for one-time use when collecting and transmitting patient temperature signals.
Principle of disposable temperature sensor probes
Medical temperature probes can provide continuous temperature management for patients more accurately, safely and comfortably, and such temperature probes play an increasingly important role in the prognosis period during anesthesia and after perioperative period.
Features of disposable medical temperature sensor probes
1. Accurate and anti-interference skin temperature probe: The temperature probe is an embedded design, and the measured part is in direct contact with human skin. The probe chip has high sensitivity and can continuously and accurately provide patient temperature data; the top reflective layer can block external temperature interference.
2. Safe and comfortable foam, medical surgical grade film: low-viscosity foam, fixed temperature measurement position, and a layer of medical surgical film on the bottom is comfortable and non-irritating to the skin, especially for infants and children.
3. Safe, reliable, and no cross-infection: Insulation protection does not pose a risk of electric shock to patients; disposable, in line with hospital infection requirements, and no cross-infection to patients. Safe and reliable connection design prevents liquid inflow and ensures data accuracy.
Advantages of disposable medical temperature sensor probe
1. Adopting high-precision thermistor, it can continuously and accurately provide clinical temperature data to meet clinical temperature measurement needs.
2. Disposable use to prevent cross infection between patients.
3. Complete specifications to meet the temperature detection needs of adults, children, infants and newborns.
4. The adhesive surface treated with optimized technology makes the skin feel almost no stimulation or pressure.
5. The back of the surface temperature sensor probe is equipped with reflective silver paper foam to prevent interference from external heat sources, and the foam adhesive film does not damage the skin.
6. The ear canal temperature sensor probe adopts a double soft memory foam design, which can reduce the risk of damaging the tympanic membrane and block the influence of external heat sources.
7. Widely compatible with medical monitors currently on the market.
Penerangan
| Jenis: | Body Cavity Temperature Probe | B25/50: | 3950K, 3977K, 3435K |
| Kepala sensor: | O cincin, Fork Metal, Tiub yang disuntik, Npt, M16, tiub keluli Tainless | Wayar: | CL2 PT4,#24 2466,#28 1332 |
| Penggunaan: | Body Cavity Temperature Probe, Pemanas air segera, Pemanas air, penghawa dingin, peti sejuk, Air pancut air, periuk induksi, pembuat kopi | Pn (kuasa dinilai): | 50mw |
| Cahaya tinggi: | Epcos / Avx / Semitec /Subara / Mitsubishi / Sensor Thermistor Ohizumi NTC, Sensor suhu gunung permukaan | ||
Body Cavity Temperature Probe Wire 0.5M~10M Theory Signal Output Origin.
| Nama spesifikasi | Skop | Keadaan pengesanan |
| R25(Nilai rintangan nominal) | 1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (Epcos / Avx / Semitec /Subara / Mitsubishi / Ohizumi NTC Thermistor) | Suhu malar 25 ℃ ± 0.05 ℃ |
| Varians R25 yang dibenarkan(%) | ± 1, ± 2, ± 3, ± 5, ± 10 | Suhu malar 25 ℃ ± 0.05 ℃ |
| B25/50 atau B25/85(pekali bahan)(Indeks sensitiviti haba) | 2500~ 5000K | Suhu malar 25 ℃ ± 0.05 ℃
Suhu malar 85 ℃ ± 0.05 ℃ |
| Varians nilai b25/50 yang dibenarkan(%) | ± 1, ± 2 | Suhu malar 25 ℃ ± 0.05 ℃
Suhu malar 50 ℃ ± 0.05 ℃ |
| ∫(pekali pelesapan) | ≥0.8mw/℃ | Statik di udara |
| T(pemalar masa terma) | ≤25s | Statik di udara |
| Menghadap(Suhu kerja) | -30℃ ~+120 ℃ | |
| Pn (kuasa dinilai) | 50mw | dalam suhu kerja |
| Kes dan kepala | Kepala garpu, O kepala cincin,Titisan kepala air, Kes logam, Kes Tembaga Thread, Ketua suntikan, tiub keluli Tainless, atau mengikut lukisan pelanggan | |
| Wayar plumbum | #24 30# 2651, UL4411 28#, konduktor berwayar berganda dan sebagainya, atau mengikut permintaan pelanggan. | |
| Terminal | Boleh dipancarkan mengikut keperluan pelbagai terminal |
Perkhidmatan
1. Pertanyaan anda akan dijawab dalam 24 jam;
2. Kakitangan yang terlatih dan berpengalaman sentiasa berada di perkhidmatan anda.
3. Produk reka bentuk yang unik dan banyak produk acuan peribadi sedang menunggu pilihan anda.
4. Lindungi maklumat peribadi anda dengan tegas dan idea reka bentuk anda.
Soalan Lazim
Q1. Bolehkah saya mempunyai pesanan sampel untuk ntc, PT100, PT1000, RTS, dan sensor DS18B20?
A: Ya, Kami mengalu -alukan pesanan sampel untuk menguji dan memeriksa kualiti. Sampel bercampur boleh diterima.
Hubungi kami
Menunggu e -mel anda, Kami akan membalas anda dalam 12 Jam dengan maklumat berharga yang anda perlukan.
English
Afrikaans
العربية
বাংলা
bosanski jezik
Български
Català
粤语
中文(简体)
中文(漢字)
Hrvatski
Čeština
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
हिन्दी; हिंदी
Magyar
Bahasa Indonesia
Italiano
日本語
한국어
Latviešu valoda
Lietuvių kalba
македонски јазик
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Українська
اردو
Tiếng Việt



