5X20mm 125v/250v Керамички осигурувачи со олово, (3/16 инч X 3/4 инчи)

5x20mm Ceramic Fuse selection and application: The types of fuses are commonly wire fuses, glass fuse tubes, quartz sand fuses, insert fuses, итн. The different forms have different usage environments.

The rated current of 5x20mm fuses with different wire diameters is also different.
When selecting and adapting fuses, they will be affected by voltage and current, resulting in differences. From the voltage type: generally there are three types of high-voltage fuses, low-voltage fuses, and electronic circuit fuses. Differentiate from the current level: generally ranging from 0.5A to 100A.

Керамички осигурувачи 5x20mm комплети - Супер брзи електронски компоненти

Керамички осигурувачи 5x20mm комплети – Супер брзи електронски компоненти

Witonics 5x20mm 10A 250v Slow Blow Ceramic Fuses

Witonics 5x20mm 10A 250v Slow Blow Ceramic Fuses

bussmann керамички осигурувачи 5x20mm

bussmann керамички осигурувачи 5x20mm

5x20mm ceramic tube fuse size chart

5x20mm ceramic tube fuse size chart

5X20mm Ceramic Tube Fuse Electrical Characteristics

5X20mm Ceramic Tube Fuse Electrical Characteristics

In the process of selecting fuses, in addition to the above content, two types of overcurrent protection and overheating protection should be distinguished. Overcurrent protection: It is the most commonly used current limiting fuse. Overheating fuse: It plays a protective role when the temperature is too high. It is generally used in electrical appliances with heating and temperature control requirements. На пример, фенови за коса, електрични котлиња, електрични пегли, thermal relays, итн.

The configuration of the fuse, its current size is the key measurement indicator of the protection function. Attention should be paid to the four current values ​​of normal current (номинална струја), fuse current, short-circuit current, and impact current. Its rated current is generally 1-1.2 times the current of the protected circuit.

Прекршувачки капацитет Материјал Работна температура Услови за лемење
VDE:35A or 10ln whichever is greater(250mA-6.3A)
UL:50 amperes at 125V/250V AC (250mA-10A)
Fuse body –glass tube
Крајна капа –месинг обложен со никел
Pigtailtin plated copper on nickel plated brass cap
-40℃~+125℃ Брано лемење:260℃,≤5S
Рачно лемење: 360℃,≤1S

Functional Characteristics

Testing current Време на удар
Min Макс
150% 1 час
210% 100ms 1800с
275% 10ms
400% 3ms 300ms
1000% 20ms

Approvals(○ Pending ● Approvals)

Тековен рејтинг Оценка на напон Нормално топење
I2T(А2сек)
Одобрувања
VDE CQC UL PSE KC
250Ма 125V/250V 0.14
300Ма 125V/250V 0.20
315Ма 125V/250V 0.23
350Ма 125V/250V 0.27
400Ма 125V/250V 0.38
500Ма 125V/250V 0.50
600Ма 125V/250V 0.72
630Ма 125V/250V 0.9
750Ма 125V/250V 1.2
800Ма 125V/250V 1.6
125V/250V 2.4
1.25А 125V/250V 3.5
1.5А 125V/250V 4
1.6А 125V/250V 7.2
125V/250V 9.6
2.5А 125V/250V 16
125V/250V 17.8
3.15А 125V/250V 22
3.5А 125V/250V 28
125V/250V 45
125V/250V 62
125V/250V 70
6.3А 125V/250V 72
125V/250V 88
125V/250V 110
10А 125V/250V 144

Контактирајте не

Чекајќи ја вашата е -пошта, Ние ќе ви одговориме во рамките 12 часови со вредни информации што ви беа потребни.

Поврзани производи

Побарајте понуда

Пополнете го нашиот формулар за барање за понуда и ние ќе одговориме на вашата порака што е можно поскоро!