DS18B20 Temperature Sensing Wire Stainless Steel Probe Kit
27 Sep
Temperatūras sensora tehnoloģija

Design of DS18B20 Digital Temperature Sensor for STM32

DS18B20 is a digital temperature sensor that uses a single bus timing to communicate with the host. Only 1 Wire is needed to complete the temperature data reading;
DS18B20 has a built-in 64-bit product serial number for easy identification. Multiple DS18B20 sensors can be connected to 1 Stieple, and through 64-bit identity authentication, the temperature information collected from different sensors can be read separately.

Turpināt lasīt

Build a simple circuit by connecting DS18B20 digital sensor to Arduino
27 Sep
Temperatūras sensora tehnoloģija

DS18B20 Digital Temperature Sensor Connect Arduino

Today I will show you how to use the DS18B20 digital temperature sensor with an Arduino so you can measure the temperature of air, liquids such as water, and the ground.
To connect the DS18B20 digital temperature sensor to Arduino, you need to do the following steps:
‌Hardware connection‌:
Connect the VCC pin of DS18B20 to the 3.3V power pin of Arduino.
Connect the GND pin of DS18B20 to the ground pin of Arduino.
Connect the data pin of DS18B20 to the GPIO pin of Arduino (for example, GPIO4).
Connect a 4.7kΩ pull-up resistor between the data pin and the 3.3V power pin.

Turpināt lasīt

Advantages of NTC Thermistor Sensors in Coffee Machines
20 Sep
Temperatūras sensora tehnoloģija

NTC Thermistor Sensors Selection and Application | High Accuracy and Precision

High Accuracy and Precision NTC thermistors Sensors are used in various industries, from medical to industrial applications. The medical industry relies on NTC’s in various applications including catheters, dialysis equipment, and patient monitoring. This medical sensor part is 1355 Ohms at 37°C with Beta 25/85 no 3976.

Turpināt lasīt

04 Juceklis
Temperatūras sensora tehnoloģija

PT100/PT1000 temperatūras iegūšanas shēmas šķīdums

Metāla termiskie rezistori, piemēram, niķelis, copper and platinum resistors have a positive correlation with the change in resistance with temperature. Platīnam ir visstabilākās fizikālās un ķīmiskās īpašības, un tas ir visplašāk izmantotais. The temperature measurement range of the commonly used platinum resistor Pt100 is -200～850 ℃. Papildus, the temperature measurement ranges of Pt500, PT1000, utt.. ir secīgi samazināti. PT1000, temperature measurement range -200～420 ℃. Saskaņā ar IEC751 starptautisko standartu, Platīna rezistora PT1000 temperatūras raksturlielumi atbilst šādām prasībām:

Turpināt lasīt