Pelindung Termal Bulat Tahan Tekanan Thermik S01

The PTC thermistors and thermal protectors produced by the German THERMIK company are stable products successfully developed in 1968. It enjoys a high reputation in the international market and is recognized as an excellent choice for protecting motors, transformator, pemberat, perkakas listrik, dll.. Sakelar suhu (Pelindung termal) diproduksi oleh Perusahaan THERMIK ditandai dengan ukurannya yang kecil, ketahanan terhadap tekanan mekanis yang sangat tinggi, ketahanan guncangan yang tinggi, dan stabilitas yang sangat baik. Termistor PTC dicirikan oleh ukurannya yang kecil, respon cepat, 4 lapisan perlindungan, Dan 3 kepala dihubungkan secara seri. Itu dapat ditanam di kumparan tiga fase motor dan dapat melindungi suhu yang berbeda. It can also protect key parts such as motor bearings and lubricants; in this field, THERMIK represents high quality, reliability and durability. Tempertur (TPQE): Thermik's first agent/rare distributor/first-level agent/authorized sales in China.

ST01 series temperature switch
Product advantages:
• Same thermal protection function, harga rendah
• Obtained UL and TUV certification, breaking Germany's 30-year monopoly on temperature switches.
• Good airtightness, which can prevent product failure during the vacuum dipping process.
• Small size, suitable for being buried inside the coil.
• Metal shell, can withstand 50KG coil shaping pressure, has good thermal conductivity, and is sensitive to temperature.
• Pure temperature products, the current does not flow through the bimetal, no current heating effect, accurate temperature control.

technology:
• Integrate global supply chain resources, and the bimetallic sheet uses materials from the world's largest manufacturer, the United States EMS. The shell adopts the stamping and forming technology of German supplier.
• The reed is made of Japanese NGK material, which is processed and produced by Japanese stamping parts suppliers.
• The shell and reed are silver-plated, which greatly reduces the contact resistance.
• The core components of the two pieces adopt fully automated molding equipment and temperature screening tunnel kiln production testing, with good consistency and stable performance.

Parameter Teknis

	With insulation sleeve	S01
1	Contact type	Usually closed
2	Rated switching temperature (NST) every 5 ℃	60-200℃
3	Standard tolerance	±5K
4	Reset temperature range according to UL / CSA at rated switching temperature	30K±15K
5	Applied voltage ... AC ... / DC	...500V ~/...100V=
6	Tegangan terukur, AC	250V\|500V
7	Nilai saat ini, alternating current cosφ = 1.0	2.5A\|0.75A
8	Nilai saat ini, alternating current cosφ = 0.6	1.6A\|0.50A
9	Number of switches in In and Un conditions	10.000
10	Current sensitivity in In	TIDAK
11	Maximum switching current at 250V ~ / number of switching	5.0A/2000
12	Contact bounce time	< 1MS
13	Resistensi kontak (refer to MIL-Stand, R5757)	< 50mΩ
14	Impregnation resistance (according to Thermik test)	Fit
15	Vibration resistance at 10-60Hz	100m/s2
16	Casing pressure stability (special test to maximum)	450N(45kg)
17	High voltage insulation (no C type)	2 persegi panjang
18	Protection level	SAYA
19	Standard connection	lead 0.25mm2
20	Diameter d (dengan / without insulation sleeve)	9.4/9.0mm
21	Height h (dengan / without insulation sleeve)	4.8/4.3mm
22	Insulation sleeve length	16mm
23	Screw / -length	-
24	Wrench size / maximum torque	-
25	Approved according to safety design	VDE.UL.BEAB.CSA.SEMKO

AGENCY FILE NUMBER STANDARD NUMBER APPLICATION
UL E305764 873 Perlindungan motorik
VDE 40016121 EN60730-2-2 Motor protection
TUV R50109800 EN60730-2-3 Lighting Protection
TUV R50110965 EN60730-2-9 Thermal cut-out
CB CN5785 IEN60730-2-2 Motor protection
CQC CQC05002013372 GB14536.1 GB14536.3 Motor protection Limit and regulating controls