Tag Archives: Termistorska tehnologija

NTC (Negativni koeficijent temperature) Senzor temperature je element mjernog temperature koji koristi eksponencijalno smanjenje otpora termistora kako temperatura raste. Njegova jezgra je keramički poluvodič napravljen sinteriranjem metalnih oksida (poput mangana, kobalt, i nikla), a temperatura se zaključuje mjerenjem promjene otpora. Slijede njegove temeljne tehničke karakteristike, prijava, i točke odabira:

Postoje četiri glavna senzora temperature koja se danas koriste u modernoj elektronici: Negativni koeficijent temperature (NTC) termistori, Detektori temperature otpora (RTS), termoparovi, i integrirani utemeljeni na poluvodičima (IC) senzori.

Pri odabiru termistora, Doista je potrebno sveobuhvatno razmotriti mnoge ključne parametre i pakiranje (kapsulacija epoksidne smole, Kapsulacija staklenih perlica, tankog filma inkapsulacija, Kapsulacija SMD -a, Inkapsulacija senzora sonde od nehrđajućeg čelika, premaz za ubrizgavanje). Dopustite mi da vam detaljno kažem:

‌ The resistance range of thermistors is wide, and the resistance of NTC thermistors can range from tens of ohms to ten thousand ohms, and even special devices can be customized according to needs. Commonly used resistance values ​​are 2.5Ω, 5Ω, 10Ω, itd., and common resistance errors are ±15%, ±20%, ±30%, itd. The resistance range of PTC thermistors is usually from 1KΩ to hundreds of KΩ.

‌Reasonable arrangement of temperature sensors‌: The location and arrangement of temperature sensors will also affect the response time. If the contact area between the sensor and the object being measured is large, the heat exchange will be faster and the response time will naturally be shorter. However, please note that too large a contact area may also lead to increased measurement errors, so we have to make a trade-off based on the actual situation.