استاندارد تشخیص سنسور دمای تهویه هوا
نام محصول : سنسور دمای تهویه هوا;
نوع : 10k
مادی : مس, پلاستیکی;اندازه سر : 2.5 x 0.5 سانتی متر / 1″ x 0.2″(ح*د)
طول کل : 51سانتی متر / 20″;رنگ : سیاه, رنگ مس
نام محصول : سنسور دمای تهویه هوا;
نوع : 10k
مادی : مس, پلاستیکی;اندازه سر : 2.5 x 0.5 سانتی متر / 1″ x 0.2″(ح*د)
طول کل : 51سانتی متر / 20″;رنگ : سیاه, رنگ مس
ترمیستورهای PTC مقاومت هایی با ضریب دمای مثبت هستند, این بدان معنی است که مقاومت با افزایش دما افزایش می یابد. ترمیستورهای PTC بر اساس مواد مورد استفاده به دو گروه تقسیم می شوند, ساختار آنها, و روند تولید.
پروب سنسور PT100 مقاومت دارد 100 اهم در 0 ° C و 138.5 اهم در 100 درجه سانتیگراد. مقاومت آن به صورت خطی با دما متفاوت است, یعنی, با افزایش دما, مقاومت PT100 نیز همینطور است; از این رو, اگر بتوانیم مقاومت را اندازه گیری کنیم, ما می توانیم دما را تعیین کنیم.
The main difference between a Pt100 and a Pt1000 sensor is their nominal resistance at 0°C, with a Pt100 having a resistance of 100 ohms and a Pt1000 having a resistance of 1000 ohms, meaning the Pt1000 has a significantly higher resistance, making it more suitable for applications where precise temperature measurement is needed with minimal influence from lead wire resistance, especially in 2-wire circuit configurations;
PT100, the full name of platinum thermal resistor, is a resistive temperature sensor made of platinum (Pt), and its resistance value changes with temperature. در 100 after PT means that its resistance value is 100 ohms at 0℃, and its resistance value is about 138.5 ohms at 100℃.
This article explores 2-, 3-, and 4-wire configurations for resistance temperature detectors (RTS), focusing on how environmental factors, accuracy requirements, cost, and wire configuration affect selection. The 4-wire configuration is complex but offers the highest accuracy, while the 2-wire configuration has advantages in lower-accuracy applications. Choosing a configuration requires a combination of application requirements and practical conditions.
An RTD (Resistance Temperature Detector) is a sensor whose resistance changes as its temperature changes. The resistance increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is repeatable over time.