Carel NTC060WH01 IP68 SENSOR NTC PT100 (Hecho en china)

The Carel NTC060WH01 is an NTC temperature sensor with a stainless steel probe, primarily used for liquid or gas temperature measurement in HVAC/R (Calefacción, Ventilación, Aire acondicionado, y refrigeración) sistemas.

Unlike the previously reviewed NTC030HF01 (clamp-type, suitable for measuring pipe surface temperature), this sensor features a stainless steel probe and long cable, designed for insertion-type installation.

Detailed specifications are as follows:

Elementos de parámetros	Detailed Information
Marca	Carel (Fabricante OEM de China)
Tipo de producto	NTC Temperature Probe (with Stainless Steel Probe)
Temperature Sensing Element	CNT (Negative Temperature Coefficient Thermistor), 10 kΩ @ 25°C；PT100，PT1000
Material de la sonda	Acero inoxidable
Tamaño de la sonda	Diámetro 6 mm × Length 50 milímetros
Rango de medición	-50 a +105 °C (Some data indicates -58 to +221°F)
Longitud del cable	6 medidores
Measuring Accuracy	±1%

Key Features and Applications
Stainless Steel Probe Design: The 6mm diameter, 50mm long metal probe is robust, durable, tiene buena conductividad térmica, and is corrosion-resistant. This design makes it ideal for direct measurement of medium temperature by insertion into ducts, water tanks, liquid lines, o dentro del equipo, offering greater accuracy than clamp-type sensors in non-invasive measurement scenarios.

6-Cable del medidor: The 6-meter cable provides significant installation flexibility, allowing the sensor probe to be placed remotely while the controller is installed in an easily accessible location.

IP68 high protection rating: This means the sensor can be completely and continuously submerged in water without damage. This makes it ideal for use in humid, condensation-prone, or environments with a risk of direct liquid contact.

Replacement Model Information: This model replaces the older models NTC060WH03, NTC060WH0S, and NTC060WP00. You can choose this model with confidence.

Selection and Comparison Recommendations:
Cuándo elegir NTC060WH01: Cuando se requiere medición de temperatura por contacto directo, como insertar la sonda en los conductos de aire, conductos de liquido, o dentro del equipo; cuando se necesita transmisión de señal a larga distancia; o cuando el ambiente de instalación es muy húmedo o puede estar sumergido en líquido (Característica IP68).

When to choose NTC030HF01: When measuring the surface temperature of circular pipes such as refrigerant pipes and water pipes, and where it is undesirable to damage the pipes by making openings for installation (clamp-type installation is more convenient).