KSD301 10A 250V NC / NO Thermostat Temperature Switch Thermal control Switch

KSD301 NC / NO （Normally open/normally closed） Thermal control Switch Electrical Rating : 16A 125V AC (Resistive Load). 10A 250V AC Thermostat. 16A 250V AC. Operating Temp : 50 ~ 230℃ (UL.CUL 205℃). bimetal reaction,auto-reset thermostar, plastic thermostat shell, fixed protector holder. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) temperature. At lower temperature the thermostat is closed.

KSD301 Temperature Control Switch Thermostat 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

KSD301 Temperature Switch Control Sensor Thermal Thermostat 50°-160° clubfoot

Descripció del producte
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, reliable, no arcing, long service life, and less radio interference. It is mainly used in disinfection cabinets, electric water bottles, coffee pots, electronic tile supports, hot water bags, water dispensers, hair dryers, vacuum cleaners, electric heaters, microwave ovens, electric irons, clothes dryers, motors and other electrical appliances.

Current Ratinf(Ir): 5Una,10Una,15A 16A;
Voltage Rating(Ur):125V 250V ac;
Tf Tolerance: ±5℃
Electric intensity: AC2000V 50/60Hz
Contact resistance: less than 50mΩ
Insulation resistance: more than 100MΩ
Response speed: ≤1℃/min
Life time: more than 30000 cycles
Approvals: UL TUV CQC

Action Temperature(Tf) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Normally Closed: the thermostat is closed(connected) at normal status
Normally Open: the thermostat is open(disconnected) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Standard Package
100pcs per bag

Shipping Term:
EXW, DDU, DDP, C&F, FOB

Shipping Methods:
International Express, By Air, By Sea