DS18B20 مسبار استشعار درجة الحرارة الرقمية – قابلة للبرمجة

هذه نسخة مخصصة ذات سلك واحد ومقاومة للماء من مستشعر DS18B20. مفيد عندما تحتاج إلى قياس شيء بعيد, أو في الظروف الرطبة. Using the digital temperature sensor DS18B20 from Dallas Semiconductor and the high thermal conductivity sealant potting, the temperature sensor is highly sensitive and has a small temperature delay. مستشعر درجة الحرارة يدعم “1-سلك” واجهة (1-سلك), ونطاق درجة حرارة القياس هو -55 درجة مئوية ~ +125 درجة مئوية. In the range of -10℃~+85℃, الدقة زائد أو ناقص 0.5 درجة مئوية. The field temperature is directly transmitted in a digital way of “1-سلك”, which greatly improves the anti-interference ability of the system. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.

مسبار مستشعر درجة الحرارة الرقمي DS18B20 القابل للبرمجة

OD 6*30 مللي متر مواسير الصلب غير القابل للصدأ UL2547 كابل DS18B20 مستشعر درجة الحرارة الرقمي

DS18B20 temperature sensor -55℃ ~ +125℃ Power supply 3.0V-5.5V

It is suitable for field temperature measurement in harsh environments. DS18B20 digital temperature sensors all have unique numbers, and the temperature acquisition equipment uses the number to identify the corresponding temperature sensor.

The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication.

We toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. We don’t have a detailed tutorial up yet but you can get started by using the Dallas Temperature Control Arduino library which requires also the OneWire Library.

Cable specs:
Stainless steel tube 6mm diameter by 30mm long
Cable is 36″ long / 91سم, 4قطر مم
Contains DS18B20 temperature sensor
If your sensor has four wires – Red connects to 3-5V, Black connects to ground and White is data. The copper wire is soldered to the wire shielding
If your sensor has three wires – Red connects to 3-5V, Blue/Black connects to ground and Yellow/White is data

DS18B20 Technical specs:
نطاق درجة الحرارة القابلة للاستخدام: -55 إلى 125 درجة مئوية (-67° f إلى +257 درجة فهرنهايت)
9 ل 12 دقة قابلة للاختيار
Uses 1-Wire interface- requires only one digital pin for communication
فريد 64 معرف بت محترق في رقاقة
يمكن لمستشعرات متعددة مشاركة دبوس واحد
± 0.5 درجة مئوية دقة من -10 درجة مئوية إلى +85 درجة مئوية
نظام إنذار محدد درجة الحرارة
Query time is less than 750ms
Usable with 3.0V to 5.5V power/data

سمات:
·High-quality stainless steel tube packaging, ضد للماء, مقاوم للرطوبة ومقاوم للصدأ
·Stainless steel head lead length 1 meter, steel tube 6*50mm (lead length is 1 meter, 2 meters and 3 meters in stock, يمكن تخصيصها وفقًا للاحتياجات)
·Each probe is individually packaged after strict testing
·3.0V~5.5V power supply
·9~12-bit adjustable resolution
·Wide temperature sensing range -55℃ ～ +125℃ (lead can only withstand a temperature of about 85 درجات)
No external components are required, unique single bus interface
···DS18B20’s sealing glue is hard glue, and the wire is pure copper lead (not aluminum-plated copper);
The probe uses an imported DS18B20 temperature sensor chip, and each pin of the chip is separated by a heat shrink tube to prevent short circuits, and the internal sealing glue is waterproof and moisture-proof.