فئات المنتجات
- بولت داون فيوز 8
- الصمامات الحرارية 32
- الصمامات جبل السطح 12
- الثرمستور 27
- حامل فيوز جبل ثنائي الفينيل متعدد الكلور 27
- تسخير الأسلاك 6
- أصحاب الصمامات بليد 17
- ترموستات 49
- الصمامات الكهربائية 24
- مستشعر درجة حرارة السيارات 7
- قاطع الدائرة الحرارية 20
- حامل صندوق الصمامات 36
- مستشعر درجة الحرارة 75
- التبديل الحراري 68
- فيوز السيارة 20
علامات المنتج
Bimetal snap disc thermostat
The Bimetal snap disc thermostat ( Thermal Cut-Off switches Kit, snap disc Thermal switch Kit) prevents the dryer from overheating when the dryer high limit Thermal switch fails in a closed circuit condition.
The Bimetal snap disc thermostat ( Thermal Cut-Off switches Kit, snap disc Thermal switch Kit) prevents the dryer from overheating when the dryer high limit Thermal switch fails in a closed circuit condition. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.
المعلمات الفنية
1. المعلمات الكهربائية: 1) CQC, VDE, أول, كول? تيار متردد 250 فولت 50 ~ 60Hz 5A / 10أ / 15أ (resistive load)
2) UL AC 125V 50Hz 15A (resistive load)
2. نطاق درجة حرارة التشغيل: 0 ~ 240 درجة مئوية (خياري), temperature accuracy: ± 2 ± 3 ± 5 ± 10 درجة مئوية
3. The difference between recovery and action temperature: 8 ~ 100 ℃ (خياري)
4. Wiring method: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, سماكة 0.5, 0.8mm optional)
5. Service life: ≥100,000 times
6. Electrical strength: AC 50Hz 1800V for 1min, no flicker, no breakdown
7. مقاومة الاتصال: ≤50MΩ
8. مقاومة العزل: ≥100MΩ
9. Contact form: مغلق عادة: temperature rise, contact open, temperature drop, contact open;
عادة مفتوحة: Temperature rises, contacts turn on, temperature drops, contacts turn off
10. Enclosure protection level: IP00
11. طريقة التأريض: Connected to the grounded metal parts of the device through the thermostat metal case.
12. Installation method: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
سمات
It has the characteristics of stable performance, دقة عالية, حجم صغير, خفيفة الوزن, موثوقية عالية, حياة طويلة, and little concern for radio.

Bimetal thermal protection

Reset Snap Disc Thermostat

dryer Thermal Cut-Off switches
اتصل بنا
في انتظار البريد الإلكتروني الخاص بك, سوف نقوم بالرد عليك في غضون 12 ساعات مع المعلومات القيمة التي تحتاجها.