English
Afrikaans
العربية
বাংলা
bosanski jezik
Български
Català
粤语
中文(简体)
中文(漢字)
Hrvatski
Čeština
Nederlands
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
हिन्दी; हिंदी
Magyar
Bahasa Indonesia
Italiano
日本語
한국어
Latviešu valoda
Lietuvių kalba
македонски јазик
Bahasa Melayu
Norsk
پارسی
Polski
Português
Română
Русский
Cрпски језик
Slovenčina
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Українська
اردو
Tiếng Việt
Produkte
NTC temperature sensor with Overmolding Terminal Connection Line
NTC temperature sensor probe with Overmolding Connector (JST, Molex, RJ11, RJ12, RJ45, RJ50, XH, SM, PH, Aviation plug, terminal blocks, 5557, Faston terminal, audio jack, ens). The sensor head is made from TPE material, which has a good adhesion and sealing.
NTC Thermistor Probe and Cable
Surface Temperature NTC Probe/Assembly; Air-Gas NTC Probe/Assembly; HVAC/Refrigeration System NTC Probe/Assembly; Liquid Level NTC Probe/Assembly; Patient Monitoring NTC Probe/Assembly.
NTC Thermistor Sensor Probe -vergadering
NTC -kabelsonde -eenheid met metaalbuis, silikoonkabel. Reeks: FTR2SIL meetbereik: -50 na 180 ° C sensor: NTC, PT100- of PT1000 -kabelmateriaal: Silikon. Hierdie sonde bestaan uit 'n NTC -termistor wat gesoldeer is 24 AWG het TPE -kabel gestrand en in 'n koperbehuising ingeplak. Die vergadering laat die gevormde. Die NTC -termistor -sensorstelsel gebruik NTC -sensorelemente 1K, 2K, 5K, 10K, 100K, 1000K; B Waardes 3375K, 3470K, 3950K, 3700k, 3935k, 3380k, 3450k, 3550k, 3600k, 3977k, 3950k.
NTC Thermistor Sensor Water Temperature Measurement using EPCOS NTC thermistor
1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k ohm; B25/50: 3950 3435 3977K thermistor probe ntc temperature Measurement sensor using EPCOS NTC thermistor. NTC Thermistors sensor provide voltage and noise suppression as well as temperature measurement and compensation in automotive applications. These thermistors sensor probe feature multilayer NTC with inner electrodes, nickel barrier termination, and superior resistance temperature Measurement stability during soldering.
NTC thermistor sensors probe used in Electric Heater
NTC thermistor sensors design is focused on the heater requirements control with 3 Meter PVC Cover Cable and widely used in dry and high temperature environments. UL recognized models available upon request.
NTC, PTC, PT100, DS18B20 for Temperature Probe Sensors
Thermocouple probe: It uses the thermoelectric effect to measure temperature, and has the characteristics of a wide measurement range and fast response speed.
Thermal resistance probe: uses the property that the resistance of metal or semiconductor materials changes with temperature to measure temperature, and has the characteristics of high measurement accuracy and good stability.
Semiconductor probe: uses the property that the conductivity of semiconductor materials changes with temperature to measure temperature, and has the characteristics of small size, light weight and low power consumption.
Overcurrent Protection | 5×20 6×30 mm Cartridge Fuses
An overcurrent protection electrical fuse is a safety device that interrupts the flow of electricity in a circuit when the current exceeds a predetermined level. It acts as a sacrificial link, melting and breaking the circuit to prevent damage to wiring and other components from overheating or potential fires due to excessive current.
Overcurrent protection PTC thermistor
Overcurrent protection PTC thermistors are protective components that automatically protect against abnormal temperatures and currents, and are commonly known as “resettable fuses” of “10,000-time fuses.” They replace traditional fuses and are widely used for overcurrent and overheat protection in motors, transformators, switching power supplies, electronic circuits, and other applications.
Panel Fuse Holder R3-54B 6.3A 250V for 5x20mm Solderable Terminal
R3-54B Panel Fuse Holder 6.3A, 250V, 10N, 125V AC; Length: appr. 42mm; Holder for 5×20 mm fuse. See more About this item. R3-54B UL cUL Certification Fuse Holder Block Solderable Terminal Screw Mounting, Screw Cap Fuse Holder Slotted Driver Type.
Panel Mount Fuse Holder, 3AG Fuse 15A, 480V Eaton Bussmann Bk-Hvp-Hh-R
Alco Part Number: K316APN01 phenolic resin ALCO Panel Mount Fuse Holders 6x30mm. Amps: 15. Voltage (Vac): 125. Mounting: Panel Lead/Terminal Type: Solder Lug Number Leads/Terminals. Holds Fuse Size: 1/4 x 1 1/4 inches / 6 x 30 mm (Holds AGC,ABC,MDL & MDA fuses); Max Amps: 15 @ 125v (US) of 10 @ 250v (EU); Mount Cutout : M13 (21/32 inch)
PCB Mount Fuse Clips and Holders Circuit ATS Blade Fuse Holders
PCB Mount SL-506P ATS Fuse Clips and Holders for 297 ATM Fuses. Materiaal: durable glass and hard plastic. Partially nickel-plated copper caps at both ends, strong electrical conductivity, stable operation.