Oppervlakgemonteerde temperatuursensorsonde vir ryskoker

NTC-temperatuursensorsonde gebruik in ryskoker se boonste deksel, Kommersiële Deksel Rice Cooker Top, Deksel Temp Meet Toebehore 23.62 x 0.39 x 0.39 duim; 0.48 onse.
Rysstoof top deksels temperatuur sensor– vinnige reaksietyd vir onmiddellike aanpassings aan verwarmingskrag: met 'n vinnige reaksie tyd, hierdie sonde maak voorsiening vir onmiddellike aanpassings aan die verwarmingskrag om die verlangde temperatuur te handhaaf.
Rice cooker accessories– suitable for kinds of rice cooker, provides accurate temperature monitoring.
Replacement rice cooker top cover sensor– the material is safe and light, which is wear resistance and practical for the lasting time use.

As a common equipment in modern kitchens, induction cooker is loved by the majority of users for its efficient and convenient heating method. In the work of induction cooker, temperature sensor plays a vital role. It can monitor the temperature of the stove surface in real time to ensure the cooking taste and safety of ingredients. But when the temperature sensor fails, we need to detect and repair it. This article will introduce how to detect the quality of induction cooker temperature sensor.

The induction cooker temperature sensor is mainly responsible for monitoring the temperature of the induction cooker surface to prevent equipment damage or fire caused by overheating. It controls the heating power of the induction cooker by sensing temperature changes, thereby maintaining a suitable cooking temperature.

Preparation before detection
Before performing the test, please make sure that the power is disconnected and that the induction cooker has completely cooled down. Terselfdertyd, prepare tools such as multimeter and screwdriver.

Steps for detecting the temperature sensor of the induction cooker
Disconnect the power, open the back cover of the induction cooker, and find the temperature sensor. The temperature sensor is usually located near the heating area of the induction cooker, and the shape is mostly cylindrical or flat.
Use the resistance range (Ohms) of the multimeter, and connect the red and black test leads to the two pins of the sensor respectively. Normally, the resistance of the temperature sensor should be between 100kΩ and 200kΩ. If the resistance is too large or too small, or it is infinite (open circuit) or zero (short circuit), the temperature sensor may be damaged.
Measure the resistance of the sensor again during the heating process. Normally, the resistance of the sensor should gradually decrease as the temperature rises. If the resistance changes abnormally or does not change with temperature, the sensor may be faulty.
If the resistance of the sensor is normal in the cold state, but changes abnormally during heating, the thermistor of the sensor may be faulty. Op hierdie tydstip, the temperature sensor needs to be replaced.

Rysstoof top deksels temperatuur sensor

Oppervlakmonteer elektriese drukkoker NTC-sensorsamestelling

Induction cooker thermistor & thermal fuse kit

Beskrywing

TIPE:	Yskas ontdooi sensor	B25/50:	3950K, 3977K, 3435K
Sensorkop:	O Ring, Vurk metaal, Ingespuite buis, NPT, M16, vlekvrye staal buis	Draad:	CL2 PT4, #24 2466,#28 1332
Gebruik:	Yskas ontdooi sensor, Kitswaterverwarmers, waterverwarmer, lugversorger, yskas, water fontein, induksie kookplaat, koffiemaker	Pn (gegradeerde krag):	50mw
Hoë lig:	EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC termistorsensor, Oppervlakgemonteerde temperatuursensor

Pasgemaakte lugversorging ntc temperatuur sensor Draad 0.5M~10M Teorie Sein Uitset Oorsprong.

Spesifikasie Naam	Omvang	Opsporingstoestand
R25(nominale weerstandswaarde)	1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC termistor)	Konstante temperatuur 25℃±0.05℃
R25 Toelaatbare afwyking(%)	±1,±2, ±3, ±5, ±10	Konstante temperatuur 25℃±0.05℃
B25/50 of B25/85(materiaal koëffisiënt)(termiese sensitiwiteitsindeks)	2500~5000K	Konstante temperatuur 25℃±0.05℃ Konstante temperatuur 85℃±0.05℃
B25/50 Waarde toelaatbare afwyking(%)	±1,±2	Konstante temperatuur 25℃±0.05℃ Konstante temperatuur 50℃±0.05℃
∫(dissipasiekoëffisiënt)	≥0.8mw/℃	Staties in die lug
T(termiese tydkonstante)	≤25S	Staties in die lug
Gesig(Werkstemperatuur)	-30℃~+120℃
Pn (gegradeerde krag)	50mw	binne werkstemperatuur
Kas en kop		Vurk kop, O ringkop,druppels water kop, Metaalkas, Draad koper omhulsel, inspuitkop, vlekvrye staal buis, of volgens kliënt se tekening
Leidraad		#24 30# 2651, UL4411 28#, dubbelbedraad geleier en so aan, of volgens kliënt se versoek.
Terminale		Kan vasgenael word volgens die vereistes van verskeie terminale

Dienste
1. Jou navraag sal binne beantwoord word 24 ure;
2. Goed opgeleide en ervare personeel is altyd tot jou diens.
3. Unieke ontwerpprodukte en baie private vormprodukte wag op u keuse.
4. Beskerm u privaat inligting en u ontwerpidees streng.
Vrae

V1. Kan ek 'n voorbeeldbestelling vir NTC kry, PT100, PT1000, RT's, en Ds18b20 SENSOR?
N: Ja, ons verwelkom voorbeeldbestelling om kwaliteit te toets en na te gaan. Gemengde monsters is aanvaarbaar.