Vlekvrye staal NTC Thermistor Probe B3950 10K in water dispenser

Die NTC temperatuur sensor 1% B3950 10K, 5 x 25mm met XH2.54 Connector in 'n waterdispenser is 'n toestel wat gebruik word om die temperatuur van water te meet. Hierdie sensor is gewoonlik 'n temperatuursensor wat die temperatuurinligting van die water in 'n elektriese sein omskakel. Here are some types of temperature sensors that may be used in water dispensers:
These NTC temperature sensor 10K, 15K, 20K, 50K probe types can vary depending on the design of the water dispenser and the manufacturer’s choice. The accuracy, response speed and stability of the sensor are critical to the performance of the water dispenser, so manufacturers usually choose the appropriate sensor type for a specific application.

1. The resistance of different types of NTC temperature sensor is different, but how to judge the quality of the temperature sensor? Very simple, it is to measure its voltage online, the normal voltage at 25 degrees is generally between + 2 ~ + 2.5V .

2. Because the human body temperature is constant, the on-circuit voltage is not constant (approximately 2.17V) when holding the temperature-sensing head for a while.

3. Unplug the NTC temperature-sensing head, and measure the resistance of the two pins of the socket on the line. The resistance value is basically the model value of the temperature-sensing head at 25 ℃ (this method is inaccurate after actual inspection). If the resistance is about 8K, the model value of the NTC sensor temperature head is generally 10K; if it is a 4.7K resistance, it is a 5K temperature head; and so on. Egter, for some large air conditioners, the resistance value of the NTC temperature sensor of the control board of the inverter air conditioner external unit is 3 times the lower bias resistance, dit wil sê, the resistance value measured by the above method multiplied by 3 is the resistance value of the NTC sensor at 25 °C.

4. The model value of the NTC temperature sensor is its resistance value at 25 ℃, usually 5K, 10K, 15K, 20K, 25k, 50K, 100K which are generally negative temperature coefficient, dit wil sê, the higher the temperature, the more the resistance value small.

5. Oor die algemeen gesproke, the temperature of the internal machine tube and the room temperature resistance are the same.

Vlekvrye staal NTC Thermistor Probe B3950 10K in water dispenser

NTC Thermistor 10k Nonstandard, Threaded Stud use in home electronics

M8 Skroefsonde NTC Temperatuursensor NTC10K 100K

Beskrywing

TIPE:	NTC Thermistor Probe	B25/50:	3950K, 3977K, 3435K
Sensorkop:	O Ring, Vurk metaal, Ingespuite buis, NPT, M16, vlekvrye staal buis	Draad:	CL2 PT4, #24 2466,#28 1332
Gebruik:	Temperatuursensor, Kitswaterverwarmers, waterverwarmer, lugversorger, yskas, water fontein, induksie kookplaat, koffiemaker	Pn (gegradeerde krag):	50mw
Hoë lig:	EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC termistorsensor, 3977K NTC Temperature Sensor, Thermistor Water Temperature Probe

Custom NTC Thermistor Probe Wire 0.5M~10M Theory Signal Output Origin.

Spesifikasie Naam	Omvang	Opsporingstoestand
R25(nominale weerstandswaarde)	1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC termistor)	Konstante temperatuur 25℃±0.05℃
R25 Toelaatbare afwyking(%)	±1,±2, ±3, ±5, ±10	Konstante temperatuur 25℃±0.05℃
B25/50 of B25/85(materiaal koëffisiënt)(termiese sensitiwiteitsindeks)	2500~5000K	Konstante temperatuur 25℃±0.05℃ Konstante temperatuur 85℃±0.05℃
B25/50 Waarde toelaatbare afwyking(%)	±1,±2	Konstante temperatuur 25℃±0.05℃ Konstante temperatuur 50℃±0.05℃
∫(dissipasiekoëffisiënt)	≥0.8mw/℃	Staties in die lug
T(termiese tydkonstante)	≤25S	Staties in die lug
Gesig(Werkstemperatuur)	-30℃~+120℃
Pn (gegradeerde krag)	50mw	binne werkstemperatuur
Kas en kop		Vurk kop, O ringkop,druppels water kop, Metaalkas, Draad koper omhulsel, inspuitkop, vlekvrye staal buis, of volgens kliënt se tekening
Leidraad		#24 30# 2651, UL4411 28#, dubbelbedraad geleier en so aan, of volgens kliënt se versoek.
Terminale		Kan vasgenael word volgens die vereistes van verskeie terminale

The sensor’s connection terminal and housing size and lead length can be customized according to customer requirements

Dienste
1. Jou navraag sal binne beantwoord word 24 ure;
2. Goed opgeleide en ervare personeel is altyd tot jou diens.
3. Unieke ontwerpprodukte en baie private vormprodukte wag op u keuse.
4. Beskerm u privaat inligting en u ontwerpidees streng.
Vrae

V1. Kan ek 'n voorbeeldbestelling vir NTC kry, PT100, PT1000, RT's, en Ds18b20 SENSOR?
N: Ja, ons verwelkom voorbeeldbestelling om kwaliteit te toets en na te gaan. Gemengde monsters is aanvaarbaar.