Mediese oppervlaktemperatuursensor vir babas met toleransie van ±0.1℃

Medical surface temperature sensor
Produk bekendstelling:
Medical body surface temperature sensor is used for human body surface temperature measurement, with product nominal resistance value of 2.252kΩ or 10kΩ. The probe is a stainless steel φ5.6 metal probe, which can be equipped with a 2-pin aviation plug or a 6.3mm audio plug (other plugs can also be equipped according to customer requirements). Die meting temperatuur toleransie is (25℃ ~ 45 ℃) ±0.1℃.

Medical surface temperature sensor, volledige produkmodelle, betroubare kwaliteit. 1K tot 680K weerstand opsioneel, dienslewe tot 10 jare. Mediese-graad temperatuursensor, motor sensor, huistoestelsensorskyfie gebruik hoë-presisieskyfie, die reaksietyd kan bereik 0.5 sekondes.

The chip is epoxy encapsulated and can be equipped with a 6.3mm mono audio plug (other plugs can also be equipped according to customer requirements). The measurement temperature tolerance is within (25℃ ~ 45 ℃)±0.1℃, compatible with YSI400 series temperature sensors.

Produk kenmerke:
Epoxy resin encapsulation;
Reusable;
Hoë meet akkuraatheid (25~45)℃±0.1℃;
Using temperature range 0℃~50℃;

Product application
Used for infant care, supporting monitors, suitable for emergency, intensive care units, operating rooms, ens. Continuously monitor the patient’s body temperature.

Product structure and size (Eenheid: mm)

Mediese oppervlaktemperatuursensor vir babas met toleransie van ±0.1℃

Herbruikbare seksuele veltemperatuursensor met 6,3 mm klankprop

Menslike liggaamstemperatuursensor met φ7.0 vlekvrye staalskyf

Packing quantity: 1 pcs/packing

Product structure and dimensions of body surface temperature sensor with 2-pin aviation plug

2.252kΩ or 10kΩ RT temperature resistance table for medical sensors

Voorsorgmaatreëls
— Purpose of this product: temperature measurement and control.
— Control the energy dissipation generated by the current flowing through the chip within the required range to avoid measurement errors caused by self-heating of the component.
— If the shrink sleeve is heated at the temperature sensing head, the air outlet of the welding gun should be more than 30mm away from the temperature sensing head to avoid excessive thermal shock of the resistor body caused by high temperature, resulting in resistance drift.
— Storage temperature 0℃～50℃, humidity 30%~80%RH; avoid storage in an environment with corrosive gas or direct sunlight; after opening the package, it needs to be resealed for storage.
— In view of the structural characteristics of epoxy components, users should avoid excessive stretching and bending forces from the lead wires on the component encapsulation head when using it. If the lead wire needs to be bent, the bending point or force point should be controlled on the lead wire 6mm below the encapsulation head to avoid pulling the chip, causing resistance drift or even open circuit, especially when the component is heated.

Dienste
1. Jou navraag sal binne beantwoord word 24 ure;
2. Goed opgeleide en ervare personeel is altyd tot jou diens.
3. Unieke ontwerpprodukte en baie private vormprodukte wag op u keuse.
4. Beskerm u privaat inligting en u ontwerpidees streng.

Vrae

V1. Kan ek 'n voorbeeldbestelling vir NTC kry, PT100, PT1000, RT's, en Ds18b20 SENSOR?
N: Ja, ons verwelkom voorbeeldbestelling om kwaliteit te toets en na te gaan. Gemengde monsters is aanvaarbaar.