KSD301 10A 250V NC / Geen termostaat temperatuurskakelaar Termiese beheerskakelaar nie

KSD301 NC / Nee （normaalweg oop/normaal gesluit） Termiese beheerskakelaar elektriese gradering : 16'N 125V AC (Weerstandslad). 10'N 250V AC -termostaat. 16'N 250V AC. Bedryfstemp : 50 ~ 230 ℃ (Ul.cul 205 ℃). bimetale reaksie,outo-reset termostar, Plastiektermostaatskulp, Vaste beskermerhouer. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) temperatuur. At lower temperature the thermostat is closed.

KSD301 Temperatuurbeheerskakelaar Termostaat 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

KSD301 Temperatuurskakelaar Beheer Sensor Termiese termostaat 50 ° -160 ° klubvoet

Produkbeskrywing
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, betroubaar, no arcing, long service life, and less radio interference. It is mainly used in disinfection cabinets, elektriese waterbottels, koffiekanne, electronic tile supports, hot water bags, water dispensers, haardroërs, stofsuiers, elektriese verwarmers, microwave ovens, elektriese strykysters, clothes dryers, motors and other electrical appliances.

Current Ratinf(En): 5N,10N,15A 16A;
Spanningsgradering(U):125V 250V ac;
Tf Tolerance: ± 5 ℃
Electric intensity: AC2000V 50/60Hz
Kontakweerstand: less than 50mΩ
Isolasieweerstand: meer as 100MΩ
Reaksiesnelheid: ≤1℃/min
Life time: more than 30000 siklusse
Goedkeurings: UL TUV CQC

Action Temperature(Tf) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Gewoonlik gesluit: the thermostat is closed(verbind) at normal status
Normaalweg oop: the thermostat is open(ontkoppel) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Standaard Pakket
100stuks per sak

Versendingstermyn:
EXW, DDU, DDP, C&F, FOB

Versendingsmetodes:
Internasionale Express, Met die lug, By See